installing speakup on the netbook

[Tyler Littlefield]

I was going off of what the guy at the store where I got it said, as I've not seen either brand before, I was looking around and it turns out the hardware from the lspci and that booted into grml didn't match an asus, so I went and had someone read the label to find the model. Turns out the guy can't read, and I've got an acer.

It's talked about modprobe snd_intel_hda, and I've tried that as well as using dashes instead of underline, to no affect for audio. unmuting doesn't seem to have done anything, either.

Any other ideas? as I said, I'm sort of shooting in the dark, as I have no sound and thus, no speech.

		Thanks,
Tyler Littlefield
	http://tds-solutions.net
	Twitter: sorressean

On Feb 12, 2010, at 12:23 PM, Farhan wrote:

> Hello, I have a Asus  1000he, and I was abled to install archlinux on it
> from the usb image.
> The only thing I had to do was to turn off the quickboot option in the bios.
> The quickboot partition enables the netbook to boot up quickly.
> When I repartitioned my netbook I screwed up and got rid of the fastboot
> partition and my Windows recovery partition.
> Also, as a sidenote, when you use Linux on a 1000 series, like the ha or
> he, you need to figure out some way of enabling the equal to the
> super-he engine in Windows to enable the best battery life in Linux.
> I think the superhe configurations come with the newest
> laptop-mode-tools so you should be ok.
> Farhan Khan
> On 2/11/2010 18:27, Pia wrote:
>> I apologize for being off topic and not answering your question, but
>> this brings up a good question.  What is everyone's opinion about what
>> the most Speakup / Linux compatible Netbook is out there?  I am
>> wondering what would work best and also what distros.
>> 
>> Thanks,
>> 
>> Pia
>> 
>> On Thu, 11 Feb 2010, Tyler Littlefield wrote:
>> 
>>> Hello all,
>>> I just recently got an aces netbok, and used grml with software speech
>>> to run a debootstrap.
>>> The grml system works great with the hardware, and i have software
>>> speech, ethernet and sound for the install.
>>> After I get it all installed, I don't have ethernet to run off of, so
>>> the idea was to put speakup on the system and use it to install and
>>> compile the drivers.
>>> I'm having an issue, and I was wondering if anyone has found a
>>> workaround.
>>> 
>>> What I did was built speakup in a chroot, and pointed it to the linux
>>> headers for the kernel on the debian system, so it could build against
>>> those. I installed the modules, and have espeakup set to start at
>>> boot, with speakup_soft in the /etc/modules list.
>>> I have Alsa installed, but am not receiving any sound; has anyone
>>> found a way to get that half of the mess working?
>>> 
>>> 
>>>        Thanks,
>>> Tyler Littlefield
>>>    http://tds-solutions.net
>>>    Twitter: sorressean
>>> 
>>> _______________________________________________
>>> Speakup mailing list
>>> Speakup at braille.uwo.ca
>>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>>> 
>> _______________________________________________
>> Speakup mailing list
>> Speakup at braille.uwo.ca
>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup