can't find serial port

[Kyrath. (AKA Rob)]

Alright, I tried the mode command and it seems to work in that it made the
adjustment.  When I tried the mode command for com2 or com3, it gave me an
illegal device error.
The strange thing is that I looked in the windoes device manager and found
that there was no com1 listed, but there was a com2.  Go figure.
I guess that I'll have to wait for some eyes before I can do any more.
Thanks for all of the help.
-- Rob
----- Original Message ----- 
From: "Glenn Ervin at Home" <GlennErvin at cableone.net>
To: "Speakup is a screen review system for Linux." <speakup at braille.uwo.ca>
Sent: Thursday, February 05, 2004 9:54 PM
Subject: Re: can't find serial port


> You might also try the following in a DOS box or at the DOS prompt:
> mode com1 9600,n,8,1,,
> That is the typical port settings.
> ----- Original Message ----- 
> From: "Kyrath. (AKA Rob)" <kyrath at cox.net>
> To: "Speakup is a screen review system for Linux."
<speakup at braille.uwo.ca>
> Sent: Thursday, February 05, 2004 7:20 PM
> Subject: Re: can't find serial port
>
>
> OK, it looks like the port might be disabled.  The copy command came back
> with 1 file copied, but there was no output.
> is it possible that the port is ph
>
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>