sblive speaker configurations

[Gregory Nowak]

Kirk,

My sblive card has 5 jacks.
Also, all the outputs are set to max volume in asound.conf, and the problem I described in an earlier reply to the same subject is still there.
Greg



> ----- Original Message -----
>From: Kirk Reiser <kirk at braille.uwo.ca
>To: speakup at braille.uwo.ca
>Date: 21 Aug 2001 18:28:00 -0400
>Subject: Re: sblive speaker configurations

>Hi Chuck:  The answer is actually simple.  What you think of as the
>lineout on your sblive is actually your rear out.  The four jacks on
>the back are line-in, microphone, front-out and rear-out.  So if you
>increase your rear speaker volume in amixer you should be amazed by
>the output of your non-working powered speakers.

>  Kirk

>--

>Kirk Reiser				The Computer Braille Facility
>e-mail: kirk at braille.uwo.ca		University of Western Ontario
>phone: (519) 661-3061

>_______________________________________________
>Speakup mailing list
>Speakup at braille.uwo.ca
>http://speech.braille.uwo.ca/mailman/listinfo/speakup