speakup direct option?
Willem van der Walt
wvdwalt at csir.co.za
Fri May 29 10:39:31 EDT 2009
Yes, I have done all these things.
On Fri, 29 May 2009, Hermann wrote:
> On 29.05.2009 15:51, Willem van der Walt wrote:
> > I am the maintainer of the Espeak Afrikaans voice and sometimes use the
> > voice myself.
> Oh, sorry for that "Dutch".
> After creating the direct file you should invoke:
> espeakup -V af
> > Here is some info on the machine I have tested on.
> > Please advise on how I should test?
> > Script started on Fri 29 May 2009 15:44:24 SAST
> > root at bid:~# echo $LANG
> > en_ZA.UTF-8
> > root at bid:~# cd /sys/modules[K/speakup/parameters/
> > root at bid:/sys/module/speakup/parameters# ls
> > [00m[00mattrib_bleep[00m [00mchartab[00m [00mfull_time[00m
> > [00mpunc_all[00m [00mreading_punc[00m [00msynth_direct[00m
> > [00mbell_pos[00m [00mcursor_time[00m [00mjiffy_delta[00m
> > [00mpunc_level[00m [00mrepeats[00m [00mtone[00m
> > [00mbleeps[00m [00mdelay_time[00m [00mkey_echo[00m
> > [00mpunc_most[00m [00msay_control[00m [00mtrigger_time[00m
> > [00mbleep_time[00m [00mdelimiters[00m [00mkeymap[00m
> > [00mpunc_some[00m [00msay_word_ctl[00m [00mversion[00m
> > [00mcaps_start[00m [00mdirect[00m [00mlang[00m
> > [00mpunct[00m [00msilent[00m [00mvoice[00m
> > [00mcaps_stop[00m [00mex_num[00m [00mno_interrupt[00m
> > [00mquiet[00m [00mspell_delay[00m [00mvol[00m
> > [00mcharacters[00m [00mfreq[00m [00mpitch[00m
> > [00mrate[00m [00msynth[00m
> > [mroot at bid:/sys/module/speakup/parameters# cat version
> > Speakup version 3.0.3
> > soft synthesizer driver version 2.4
> > root at bid:/sys/module/speakup/parameters# cat lang
> > 0
> > root at bid:/sys/module/speakup/parameters# exit
> > exit
> > Script done on Fri 29 May 2009 15:46:26 SAST
> > Linux bid 2.6.27-8-eeepc #1 SMP Sun Nov 16 12:02:12 MST 2008 i686 GNU/Linux
> Try the following in the parameters subfolder:
> echo 1 >direct
> Can the file be written? If yes, then start Espeakup like explained above.
> If you cannot create the file, you have to edit the characters file in that
> directory, to correctly speak Africans.
> Then start Espeakup with the -V option.
> Speakup mailing list
> Speakup at braille.uwo.ca
This message is subject to the CSIR's copyright terms and conditions, e-mail legal notice, and implemented Open Document Format (ODF) standard.
The full disclaimer details can be found at http://www.csir.co.za/disclaimer.html.
This message has been scanned for viruses and dangerous content by MailScanner,
and is believed to be clean. MailScanner thanks Transtec Computers for their support.
More information about the Speakup