speakup USB support will be in linux 4.13

[Janina Sajka]

Hi,

OK, but I'm sending the output of 'lsusb -v' separately, as it made an
inline reply too big for the list.

Samuel Thibault writes:
> Hello,
> 
> Janina Sajka, on ven. 15 sept. 2017 08:05:43 -0400, wrote:
> > I get this even after loading usbserial, and there is indeed no
> > /dev/ttyUSB0. 
> 

> Ah. Could you run
> 
>  ls /dev/tty*
> 
root at concerto 12:56:11 ~#\ls /dev/tty*
/dev/tty    /dev/tty12  /dev/tty17  /dev/tty21  /dev/tty26  /dev/tty30
/dev/tty35  /dev/tty4   /dev/tty44  /dev/tty49  /dev/tty53  /dev/tty58
/dev/tty62  /dev/ttyACM0
/dev/tty0   /dev/tty13  /dev/tty18  /dev/tty22  /dev/tty27  /dev/tty31
/dev/tty36  /dev/tty40  /dev/tty45  /dev/tty5   /dev/tty54  /dev/tty59
/dev/tty63  /dev/ttyS0
/dev/tty1   /dev/tty14  /dev/tty19  /dev/tty23  /dev/tty28  /dev/tty32
/dev/tty37  /dev/tty41  /dev/tty46  /dev/tty50  /dev/tty55  /dev/tty6
/dev/tty7   /dev/ttyS1
/dev/tty10  /dev/tty15  /dev/tty2   /dev/tty24  /dev/tty29  /dev/tty33
/dev/tty38  /dev/tty42  /dev/tty47  /dev/tty51  /dev/tty56  /dev/tty60
/dev/tty8   /dev/ttyS2
/dev/tty11  /dev/tty16  /dev/tty20  /dev/tty25  /dev/tty3   /dev/tty34
/dev/tty39  /dev/tty43  /dev/tty48  /dev/tty52  /dev/tty57  /dev/tty61
/dev/tty9   /dev/ttyS3
> so perhaps some yet-unknown device would show up. Also, 
> 
>  lsusb -v

Will send this as an attachment separately.

PS: modinfo speakup_ltlk does show:

parm:           ser:Set the serial port for the synthesizer (0-based).  (int)
parm:           dev:Set the device e.g. ttyUSB0, for the synthesizer.  (charp)
parm:           start:Start the synthesizer once it is loaded. (short)

-- 

Janina Sajka,	Phone:	+1.443.300.2200
			sip:janina at asterisk.rednote.net
		Email:	janina at rednote.net

Linux Foundation Fellow
Executive Chair, Accessibility Workgroup:	http://a11y.org

The World Wide Web Consortium (W3C), Web Accessibility Initiative (WAI)
Chair, Accessible Platform Architectures	http://www.w3.org/wai/apa