Slack 13.37 and 14.0

[Tony Baechler]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

The 3.2 kernel with Speakup has the broken serial support, so no hardware
speech for you with kernels after 2.6.37 which is why I suggested
installing Debian Squeeze.  What Speakup parameter are you passing to the
installer?  I agree that I don't think it's a keyboard issue, but that's
very weird.  I'm wondering if you're passing the wrong synthesizer
parameter.  If you try 64-bit Wheezy with software speech, do you have the
same problem?  That's very strange.  You might want to join the
debian-accessibility list, especially if you found a bug in D-I.  I'm
trying to isolate whether it's a Speakup or a Debian issue.

I could be wrong here, but I don't think 32-bit kernels can support drives
larger than 2 TB.  I'm sure I'll be corrected if that's wrong, but I did
quite a bit of research before upgrading my server to 3 TB drives.  The
problem seems to have to do with very large partitions.  You really need
GPT for drives larger than 2 TB because the standard X86 architecture
can't access sectors past the 2 TB boundary.  It's not an OS issue, but a
BIOS design issue.  I think you'll have problems with any 32-bit OS you
try.  If your processor isn't 64-bit, you're either out of luck or you'll
need a new processor.

On 5/14/2013 7:03 AM, Mitchell D. Lynn wrote:
> Thanks for the response.
> 
> My rate change blues are post-install for Debian and while the Speakup
> keys announce incremental rate changes, they don't actually change the
> rate. It stays at 180 something . I'd have to go check to see. Now, if
> memory serves me, the rate does change in the rate file for the synth.
> Changes in the rate file have no affect on the rate whatsoever. I don't
> think it is a keyboard issue because I have tried multiple keyboards:
> one was a PS2 connector and the other two were USB. Same result with
> all, and all seem to work fine on other systems. I will give 64-bit
> Wheezy a shot.
> 
> RE The Slackware Issue According to the Slackware docs on the DVD,
> those issues were back with version 12.x FWIW, Slack 14 uses 3.2.29
> kernel.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (MingW32)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
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=rvPy
-----END PGP SIGNATURE-----