What is .WITH. the Debian amd64 kernel and SpeakUP?
Gaijin
gaijin at clearwire.net
Thu Sep 16 10:48:48 EDT 2010
On Thu, Sep 16, 2010 at 07:38:10AM -0500, Christopher Brannon wrote:
> 1. Which synth are you using?
Both the speakup_ltlk, loaded from /etc/modules, and
speakup_soft, loaded from /etc/rc.local with the commands:
rmmod speakup_ltlk
modprobe speakup_soft
espeakup
speakupconf load
> 2. Which version of the kernel are you using? (uname -a)
Linux rivensight 2.6.32-5-686 #1 SMP Wed Aug 25 14:28:12 UTC 2010 i686
GNU/Linux
It's the unaltered Debian Squeeze kernel that came from the
amd64 installation disk, and I'm told, includes the speakup modules
compiled into the kernel, and running on a I7-930 Quad-Core CPU on a
SuperMicro X8STE motherboard with 24G's of Kingston memory. I use the
Orca screen reader for the GUI. I'm surprized that it's a 686 kernel,
but that's what Debian gave us for the 64-bit, Core-2 platforms, so I
gather that it's the correct one.
> 3. Which version of the Speakup package are you using?>
>From /var/log/dmesg Sorry for not word-wrapping):
[ 6.214497] speakup: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.217153] speakup 3.1.3: initialized
[ 6.217157] synth name on entry is: ltlk
[ 6.217339] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[ 6.217792] speakup_ltlk: module is from the staging directory, the quality is unknown, you have been warned.
[ 6.218396] synth probe
[ 6.218398] Ports not available, trying to steal them
[ 6.220396] LiteTalk: ttyS0, Driver Version 2.10
[ 6.255596] LiteTalk: ROM version: <FF>2.42A
After the above, the loop module loads, and the line in
/etc/modules is simply "speakup_ltlk", which appears to work just fine
when I bother to turn on the LiteTalk. Since I don't appear to have any
problems booting up, I leave the thing switched off. The synth is
connected to ttyS0. ttyS1 is unused (no plug), ttyS2 is a US Robotics
PCI modem, and ttyS3 is on a Axxon searial/parallel PCIE card, as the
mobo came without a friggin printer port. Both cards are reported to
work flawlessly with Linux. Lemme know if you need the output from
something like lshw or something for this...
Michael
More information about the Speakup
mailing list