startech serial card

[Gregory Nowak]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

I'm not familiar with that card, but from your description, I don't
see why it shouldn't work. Have you tried it? If it doesn't work, does
lspci show the card? Does dmesg give you any information? What is your
serial configuration like in the kernel? Do you have your serial synth
built into the kernel, and configured as the default? If yes, try
building it as a module, loading it that way, and seeing what
happens. Does your motherboard have built-in serial ports?

Again, try this only if you've tried your card, and it doesn't
work. If you haven't even tried the card, then just pop it in, and
with luck, your serial synth should start speaking the boot messages
if everything is configured properly.

Greg


On Sun, Nov 12, 2006 at 04:52:38PM -0600, randy turner wrote:
> 
> hi all,
> does speakup work with pci rs232 serial cards?
> the manual says that it will work in linux
> my guess is that i might need to load a driver
> before i load speakup?
> 
> any ideas on how to do this?
> thanks in advance
> randy turner
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup

- -- 
web site: http://www.romuald.net.eu.org
gpg public key: http://www.romuald.net.eu.org/pubkey.asc
skype: gregn1
(authorization required, add me to your contacts list first)

- --
Free domains: http://www.eu.org/ or mail dns-manager at EU.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (GNU/Linux)

iD8DBQFFV7kB7s9z/XlyUyARAgZ4AKCAxBBpWpW/dJOtmvWuVfCdWjUrrQCgjgS5
DKFklnIO+QH06YaR175eSIA=
=Z0SD
-----END PGP SIGNATURE-----