help with no sound?

[Tyler Littlefield]

where would I get the kernel-2.6.11-1.14_FC3spk.?
thx,
----- Original Message ----- 
From: "Willem van der Walt" <wvdwalt at csir.co.za>
To: "Speakup is a screen review system for Linux." <speakup at braille.uwo.ca>
Sent: Monday, February 20, 2006 12:06 AM
Subject: Re: help with no sound?


> Hello,
> I made the same mistake, thinking the audigy cards will work.
> It was sold to us as a sound blaster live.  To get it to work you need to
> install kernel-2.6.11-1.14_FC3spk.
> Kudzu will then pick up the card.  on the old machine I had it in, the
> sound was too fast and crackled.
> Another problem is that it also did not seem to support receiving multiple
> audio streams at once like the original sb live does.
> By the way it uses the snd-ca0106 module as it does not use the emu10k1
> chip.
> I think it is a good card, but the software is not there yet.
> I have put a older sb-live card in the machine to solve my problem in the
> mean while.
> I have also at some stage installed the fc4 speakup-modified kernel trying
> to get a later version of the driver, but that had a lot of other
> side-effects involving udev.
> It also did not solve the problem.
> If any one had better results, please let me
> know?
> Regards, Willem
>
> On Sun, 19 Feb 2006, Tyler Littlefield wrote:
>
>> ok, I am totally new to this, how do you load a module.
>> ----- Original Message -----
>> From: "Gregory Nowak" <greg at romuald.net.eu.org>
>> To: "Speakup is a screen review system for Linux." 
>> <speakup at braille.uwo.ca>
>> Sent: Sunday, February 19, 2006 7:54 PM
>> Subject: Re: help with no sound?
>>
>>
>>> -----BEGIN PGP SIGNED MESSAGE-----
>>> Hash: SHA1
>>>
>>> That's supported, and I believe it uses the sblive module. If that's
>>> true, and I'm not positive that it is, then you need to load the
>>> snd-emu10k1 module. If you want to be absolutely sure which module
>>> works with your card, have a look at the list of supported cards,
>>> which you should be able to find on alsa-project.org.
>>>
>>> Greg
>>>
>>>
>>> On Sun, Feb 19, 2006 at 07:37:53PM -0700, Tyler Littlefield wrote:
>>>> returned
>>>> 0000:00:0d.0 Multimedia audio controller: Creative Labs SB Audigy LS
>>>> for the sound.
>>>
>>> - --
>>> web site: http://www.romuald.net.eu.org
>>> gpg public key: http://www.romuald.net.eu.org/pubkey.asc
>>> skype: gregn1
>>> (authorization required, add me to your contacts list first)
>>>
>>> - --
>>> Free domains: http://www.eu.org/ or mail dns-manager at EU.org
>>> -----BEGIN PGP SIGNATURE-----
>>> Version: GnuPG v1.4.2 (GNU/Linux)
>>>
>>> iD8DBQFD+S9a7s9z/XlyUyARAg4oAKC8UxTyVb5V7Ko4Cj3EScBkCpEqQACfZMG9
>>> Pf7hIbzhGDiM95V48oW/AfI=
>>> =cpOF
>>> -----END PGP SIGNATURE-----
>>>
>>> _______________________________________________
>>> Speakup mailing list
>>> Speakup at braille.uwo.ca
>>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>>
>>
>> _______________________________________________
>> Speakup mailing list
>> Speakup at braille.uwo.ca
>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>>
>
> -- 
> This message is subject to the CSIR's copyright, terms and conditions and
> e-mail legal notice. Views expressed herein do not necessarily represent 
> the
> views of the CSIR.
>
> CSIR E-mail Legal Notice
> http://mail.csir.co.za/CSIR_eMail_Legal_Notice.html
>
> CSIR Copyright, Terms and Conditions
> http://mail.csir.co.za/CSIR_Copyright.html
>
> For electronic copies of the CSIR Copyright, Terms and Conditions and the 
> CSIR
> Legal Notice send a blank message with REQUEST LEGAL in the subject line 
> to
> HelpDesk at csir.co.za.
>
>
> This message has been scanned for viruses and dangerous content by 
> MailScanner,
> and is believed to be clean.  MailScanner thanks Transtec Computers for 
> their support.
>
>
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup