speakup serial ports

Garrett Klein garrettklein at comcast.net
Thu Aug 10 10:27:11 EDT 2006


Perhaps I'm being naïve, but could you not just specify speakup_ser=4 on the
boot command line? Of course, the PCI subsystem may hnot load in time...
Though iirc, you said you had modularized Speakup.

Garrett

-----Original Message-----
From: speakup-bounces at braille.uwo.ca [mailto:speakup-bounces at braille.uwo.ca]
On Behalf Of chuckh at hhs48.com
Sent: Friday, July 28, 2006 9:54 AM
To: Speakup is a screen review system for Linux.
Subject: Re: speakup serial ports


Hi Steve,

Yes. I have a box with one serial port on the motherboard, and another 
on a PCI card. The first one appears as ttyS0 and has a braille display 
on it, and the other one appears as ttyS4, where I would like to put a 
synthesizer. Some software only allows ports 0 to 3, the first four 
ports, and I cannot recall whether that is the case with speakup.

Chuck

On Fri, Jul 28, 2006 at 08:49:52AM -0600, Dawes, Stephen wrote:
> A simple reminder:
> Numbering in Linux starts with 0.
> So for example, if you have 2 serial ports on your computer, they are
> ttyS0 and ttyS1.
> So to ask if you can place a Synth on ttyS4 implies that you have 5
> serial ports on your computer.
> 
> I haven't necessarily answered your question, but make sure that you 
> are counting correctly before you try to connect and then get 
> frustrated because you are not counting correctly.
> 
> 
> 
> Steve Dawes
> Phone: (403) 268-5527
> Email: SDawes at calgary.ca
>  
>  
> 
> 
> NOTICE -
> This communication is intended ONLY for the use of the person or 
> entity named above and may contain information that is confidential or 
> legally privileged. If you are not the intended recipient named above 
> or a person responsible for delivering messages or communications to 
> the intended recipient, YOU ARE HEREBY NOTIFIED that any use, 
> distribution, or copying of this communication or any of the 
> information contained in it is strictly prohibited. If you have 
> received this communication in error, please notify us immediately by 
> telephone and then destroy or delete this communication, or return it 
> to us by mail if requested by us. The City of Calgary thanks you for 
> your attention and co-operation.
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca 
> http://speech.braille.uwo.ca/mailman/listinfo/speakup

-- 
The Moon is Waxing Crescent (11% of Full)
Get downloads from http://www.mhcable.com/~chuckh
  and remember, INFORMATION WANTS TO BE FREE!

_______________________________________________
Speakup mailing list
Speakup at braille.uwo.ca http://speech.braille.uwo.ca/mailman/listinfo/speakup






More information about the Speakup mailing list