upgrading a Slackware kernel
Steve Holmes
steve at holmesgrown.com
Sun Feb 6 13:45:35 EST 2005
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I've never seen that as you describe below. I thought CVS was
completely down like bumpy is currently. When CVS is up and running,
It has always worked OK for me unless they left a buggy in there:).
On Sun, Feb 06, 2005 at 08:58:47AM -0600, Stephen Clower wrote:
> Hello Steve,
>
> Yes, for some reason the CVS downloads are continuously trying to access Linux 2.4.28 instead of the traditional symlink to /usr/src/linux. Were these files modified in some way that they could only be applied to a specific kernel?
>
> As a side note, I downloaded 2.4.28 just for kicks and the patch still failed.
>
> On Sunday, February 6, 2005, 8:32:03 AM, you stood on a roof and loudly proclaimed:
>
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
>
> > This does bring up a slightly different angle on this question. Is
> > there a simple way to isolate the speakup patches and hand apply them
> > to my newest kernel of choice? I recall trying something like this a
> > ways back unsuccessfully. The resulting download from CVS is
> > apparently not exactly like the tarball that gets built about every 3
> > years <sigh>. I guess another question might be: how can we build our
> > own tarballs of speakup that we might be able to apply at any time CVS
> > is unavailable like now?
>
> > On Fri, Feb 04, 2005 at 08:14:03PM -0700, Joseph C. Lininger wrote:
> >> Hello,
> >> I would be happy to send you a 2.6.10 kernel tree with speakup patches
> >> as well as other patches that I use on my system. Most of them come
> >> from the gentoo-dev-sources package from Gentoo Linux, but there are
> >> a couple that I have applied by hand like grsecurity. Let me know if
> >> you're interested.
> >>
> >> --
> >> Profanity is the language all programmers know best.
> >> Joseph C. Lininger
> >> jbahm at pcdesk.net
> >> Verification: 5eab38a77ac40416e075be8f50607ff7
> >>
> >> On Thu, 3 Feb 2005, Stephen Clower wrote:
> >>
> >> >Hello folks,
> >> >
> >> > Normally I wouldn't be asking this question, but since Linux-Speakup
> >> > appears to be down indefinitely I could use some pointers. I am
> >> > running Slackware 10.0 with the Speakup enabled 2.4.26 kernel compiled
> >> > by Joseph C. Lininger. Currently, there is no software synth support
> >> > in the kernel, so I figured that if I'm going to recompile the kernel,
> >> > I might as well upgrade to 2.6.7 for the sake of being up-to-date.
> >> >
> >> > Normally I would download the kernel sources from kernel.org and run
> >> > the Speakup CVS checkout script, but for obvious reasons this won't
> >> > work. Consequently, I've decided to download the 2.6.7 kernel source
> >> > package from a Slackware 10.0 mirror along with the Speakup-2.4.26
> >> > folder from the sources directory. Will I still be able to patch the
> >> > 2.6.7 kernel with the Speakup source, or will there be something else
> >> > I need to do?
> >> >Thanks,
> >> >Steve
> >> >
> >> >
> >> >
> >> >----------
> >> >Stephen Clower
> >> >Email/.Net Messenger: steve at steve-audio.net
> >> >AIM: AudioRabbit03
> >> >Skype: sclower
> >> >
> >> >Check out my little home on the web at http://www.steve-audio.net
> >> >
> >> >
> >> >_______________________________________________
> >> >Speakup mailing list
> >> >Speakup at braille.uwo.ca
> >> >http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >> >
> >>
> >> _______________________________________________
> >> Speakup mailing list
> >> Speakup at braille.uwo.ca
> >> http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >>
> >>
>
>
>
> ----------
> Stephen Clower
> Email/.Net Messenger: steve at steve-audio.net
> AIM: AudioRabbit03
> Skype: sclower
>
> Check out my little home on the web at http://www.steve-audio.net
>
>
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
>
- --
HolmesGrown Solutions
The best solutions for the best price!
http://ld.net/?holmesgrown
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (GNU/Linux)
iD8DBQFCBmXOWSjv55S0LfERAojTAJ92wheMy8exuVs1k3J0wylGOs1jUwCg8feb
TRvZIIxCNyj0FUSxeZ5aPRk=
=J4gP
-----END PGP SIGNATURE-----
More information about the Speakup
mailing list