Installing Speakup

[Vic Beckley]

Greg,

I am running Debian 3.0 R2.

At 04:29 PM 5/1/2004, you wrote:
>-----BEGIN PGP SIGNED MESSAGE-----
>Hash: SHA1
>
>Hi Vic.
>
>Unfortunately, it seems like the tools that configure ppp for you
>insist that modems can be only on ttyS0 through ttyS3. The good news
>is that these tools are just scripts that set things up for you, and
>that you can modify that entire setup if you know what to do. So, if
>you can refresh my mind on what distro you are using, I'll see if I
>can tell you what you need to change manually. If you're running
>slackware or debian, I should be able to help. If it's something else,
>then someone else running your distro will need to tell you what
>changes you need to make manually.
>
>Greg
>
>
>On Sat, May 01, 2004 at 04:13:37PM -0400, Vic Beckley wrote:
>> Hi Greg,
>> 
>> I have made some progress.  I have gotten 2.4.26 to compile and have speech on reboot.  I checked the /proc/pci file and the dmesg output and the modem is being detected.  The output is similar to yours, but the address and IRQ are different.  It is on ttyS4.
>> 
>> I ran pppconfig again and allowed it to try to detect my modem.  It still wanted to put it on ttyS1.  I let it and that did not work.  I then manually set it to ttyS4 and when I tried connecting with pon it says this is an unknown device.  What can I check now?
>> 
>> Thanks again for your expert help.
>> 
>> 
>
>- -- 
>Free domains: http://www.eu.org/ or mail dns-manager at EU.org
>
>-----BEGIN PGP SIGNATURE-----
>Version: GnuPG v1.2.3 (GNU/Linux)
>
>iD8DBQFAlAiO7s9z/XlyUyARAlJ9AJ4sTr+MGb+8DzsInpKHqd4VaAyUkgCfTwJp
>bQ5kg0JaZNekidhj2LHIFDI=
>=DKzD
>-----END PGP SIGNATURE-----
>
>_______________________________________________
>Speakup mailing list
>Speakup at braille.uwo.ca
>http://speech.braille.uwo.ca/mailman/listinfo/speakup


Best Regards from Ohio, U.S.A.
Vic
MailTo:vbeckley at wilkshire.net