determining gateway

[Sina Bahram]

I would only caution that usually a 0 at the end of an IP address is
rather strange or odd. I have never seen that be assigned, as most
people use that as a special address for casts or whatever it may be.

Take care,
Sina

-----Original Message-----
From: speakup-admin at braille.uwo.ca [mailto:speakup-admin at braille.uwo.ca]
On Behalf Of Igor Gueths
Sent: Thursday, October 09, 2003 6:55 PM
To: speakup at braille.uwo.ca
Subject: Re: determining gateway


The last line of output when I type route is:
default         cdnt01-a-rtr.ve 0.0.0.0         UG    0      0        0
eth0
However I did find another line, which seems to contain the ip:
68.37.216.0     *               255.255.252.0   U     0      0        0
eth0
I believe that 68.37.216.0 is the correct ip in this case?

On Thu, 9 Oct 2003, Gregory Nowak wrote:

> You want to use route.
>
> The line you're looking for starts with "default", and that should be 
> the last line of output from route. The ip address right after 
> "default" should be the address of your gateway.
>
> Greg
>
>
> On Thu, Oct 09, 2003 at 06:11:30PM -0400, Igor Gueths wrote:
> > Hi all. How do I go about determining the ip of the gateway my box 
> > is using? I tried using ifconfig but it doesn't seem to say what it 
> > is.
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup at braille.uwo.ca 
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
> --
> Free domains: http://www.eu.org/ or mail dns-manager at EU.org
>
>
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca 
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>

_______________________________________________
Speakup mailing list
Speakup at braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup