Burning audio cd's.

Thomas Ward slingshooter at valkyrie.net
Thu Jan 30 03:22:04 EST 2003


Hello, everyone. I am having the worst time trying to get cdrecord to burn 
my audio cd's. I've never burned an audio cd under Linux before, but have 
burned data cd's before.
I've been reading from the cd-writing-howto, and I've used cdparanoia to 
extract to tracks from another cd, and was trying to burn them on a new 
disk to get the hangg of it. 
Here is a typescript of my commands and the errors I am getting. Can 
anyone help?

Script started on Thu Jan 30 03:12:43 2003
cdrecord -v speed=2 dev=0,0,0 -audio track1.wav track2.wav
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identifikation : 'CD-RW GCE-8240B '
Revision       : '1.06'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 6037504 = 5896 KB
FIFO size      : 4194304 = 4096 KB
Track 01: audio  40 MB (04:02.36) no preemp
Track 02: audio  40 MB (04:00.29) no preemp
Total size:      81 MB (08:04.65) = 36349 sectors
Lout start:      81 MB (08:06/49) = 36349 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, low Beta category (A-) (2)
  ATIP start of lead in:  -12294 (97:18/06)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    unknown
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 323500
Starting to write CD/DVD at speed 8 in write mode for single session.
Last chance to quit, starting real write in 9 seconds.8 seconds.7 seconds.6 seconds.5 seconds.4 seconds.3 seconds.2 seconds.1 seconds.0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0

Track 01:   0 of  40 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.002s timeout 40s

write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing  time:    5.027s
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: no error
CDB:  5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x04 (current program area is empty) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 480s
cmd finished after 0.001s timeout 480s
Fixating time:    0.004s
cdrecord: fifo had 64 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
Script done on Thu Jan 30 03:14:03 2003






More information about the Speakup mailing list