Newbie questions

[Tim Burgess]

Hi Bill,

I gave the wrong name for the source RPM that I got - it was
kernel-2.4.18-10spk.src.rpm.  I'll certainly remove the old 2.4.18-3 RPM to
save some space.  Do I copy the appropriate i686 tree from /usr/src/redhat
to /usr/src?

Still confused...  Sorry.

Tim




-----Original Message-----
From: speakup-admin at braille.uwo.ca
[mailto:speakup-admin at braille.uwo.ca]On Behalf Of William F. Acker
WB2FLW +1-303-777-8123
Sent: 19 September 2002 17:27
To: Speakup (E-mail)
Subject: Re: Newbie questions


Hi, Tim,

     The kernel source package that you need to install is
kernel-source-2.4.18-10spk.i386.rpm, not kernel-2.4.18-10spk.src.rpm.  The
best way to remove the old source tree, is to type:  "rpm -e
kernel-source".  The good news is that you almost certainly don't have to
recompile the kernel.  You do need the kernel source in order to compile
the MODEM drivers.  To make the change to your host name stick, edit
/etc/sysconfig/network.  There'll be a line that says:
HOSTNAME=localhost.localdomain
Just edit it to taste.

          HTH.
--
          Bill in Denver


On Thu, 19 Sep 2002, Tim Burgess wrote:

> Hi,
>
> I've just got a Red Hat 7.3 system going on a Sony VAIO laptop using
SpeakUp
> and a DecTalk Express.  I've got some, inevitable, questions:
>
> 1 - I ran sndconfig and my sound card was recognised and played the sample
> sound - do I need to install alsa as well?  If so, why so?
>
> 2 - I have an internal modem and I've downloaded Linux drivers for it, but
> these require the kernel sources and a recompile.  I've installed the
kernel
> source package from the SpeakUp modified Red Hat site (since this is the
> kernel I've currently got installed - 2.4.18-10spk), but I'm now
floundering
> as I expected to find a /usr/src/linux-2.4.18-10spk directory and there
> isn't one.  What I do have is a linux-2.4.18-3 (created from my original
Red
> Hat media before I installed the modified 2.4.18-10spk) and a directory
> called redhat.  I know I can delete the linux-2.4.18-3 directory but where
> do I find my new source tree?  There's lots of stuff that might suit in
the
> redhat directory, but it's been a long, long time since I recompiled a
> kernel and I don't want to blow it now, so can somebody offer me some
> pointers?
>
>   3 - My machine identifies itself as "localhost" and I'd like to change
> this - I've tried using the hostname command, but the setting doesn't seem
> to get preserved.  My machine has a fixed IP address and participates in
my
> ethernet LAN.
>
> 4 - Once I get my modem up and running, how do I configure Internet
access?
> The Red Hat Getting Started Guide only refers to graphics mode
> configuration?
>
> Many thanks in advance to anybody willing to help.  Thanks anyway to
Janina
> for getting me this far - she knows what a battle it's been!
>
> Tim
>
>
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>



_______________________________________________
Speakup mailing list
Speakup at braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup