reflector

[Erik Heil]

Hey igor.
is you're card by any chance a full duplex card?  BC I know that Packard
Bell really didn't install really good sound cards when they actually were
existing in the States here.  Just something to consider here.  You may also
try upgrading to RC2.

----- Original Message -----
From: "Igor Gueths" <igueths at attbi.com>
To: <speakup at braille.uwo.ca>
Sent: Saturday, September 07, 2002 2:28 PM
Subject: reflector


> Hi all. I am once again attempting to set up Speak Freely on my Debian
> Woody box using Alsa 0.9.0rc1. I got the mic working properly and the
> levels are set, however, sfmike doesn't seem to be capturing audio from
> the mic input, even though it is set to capture and the level is as high
> is it can go without clipping. However, if I get sfmike to transmit an au
> file across the connection to the sfspeaker host, I can hear it fine.
> Note: the sfspeaker side of the connection is my laptop running Speak
> Freely 7.2. I am trying to set up Speak Freely 7.5 (linux version). I have
> tried other versions such as 7.2, and 7.1 without success in getting
> sfmike to transmit audio from the mic. And in looking through the
> archives, apparently it is possible to use Speak Freely with Alsa. Can
> anyone enlighten me on how to get sfmike to capture mic input? I tried
> various CCFLAGS combinations using -DLINUX_DSP_SMALL_BUFFER,
> -DLINUX_DIN_AUDIO_DEV, -DHALF_DUPLEX, however I never disabled
> -DAUDIOBLOCKING. I might try this next. I have looked at all the various
> manpages, and the various docs available on speakfreely.org and still I
> haven't been able to come up with an answer. Has anyone been able to use
> Speak Freely with alsa-0.9.0rc1? If so, I would be interested in how you
> got it working. I would really like to get on the reflector with my box bc
> I'm sick of relying on the winblows version! Thanks in advance for any
> help on this.
>
> microsoft dialogue
>    This company has performed an illegal operation and will be shut down.
>    If the problem persists, delete winblows and install linux
>    close button
>
>
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>