Network card problems

[Alex Snow]

Yup, I'm on the same subnet as the router, 255.255.255.0.  The other machine
on the network has net access perfictly fine.
Explorer has caused a general protection fault in module kernel32.dll. I'm
sick of Winblows!
----- Original Message -----
From: "Igor Gueths" <igueths at attbi.com>
To: <speakup at braille.uwo.ca>
Sent: Saturday, October 05, 2002 9:34 PM
Subject: Re: Network card problems


> Are you sure that you're on the same subnet as the router? The router and
> machines should have the same netmask.
>
> microsoft dialogue
>    This company has performed an illegal operation and will be shut down.
>    If the problem persists, delete winblows and install linux
>    close button
>
> On Sat, 5 Oct 2002, Alex Snow wrote:
>
> > I just got rid of dhcp, and have assigned all computers on the network,
> > including the linux box, ip addresses.  I reran netconfig and gave it
the
> > new ip address, netmask, and gateway.  Now when I type ifconfig I see
the
> > the net address is 192.168.1.101, that's what I assigned it.  Only
problem
> > is I still have no network support.  I can't ping the box, and I can't
> > connect to my router using lynx.  Could there be some configuration on
the
> > card that is messed up? Someone suggested that I run isapnp, but the
card
> > seems to be detected fine.
> > Explorer has caused a general protection fault in module kernel32.dll.
I'm
> > sick of Winblows!
> > ----- Original Message -----
> > From: "Adam Myrow" <amyrow at midsouth.rr.com>
> > To: <speakup at braille.uwo.ca>
> > Sent: Saturday, October 05, 2002 6:55 PM
> > Subject: Re: Network card problems
> >
> >
> > > If you can, tell us what happens during bootup with DHCP.  It should
say
> > > something like "attempting to configure eth0 by contacting a DHCP
server."
> > > Next, the DHCP command is supposed to report back what it gets.  If
you
> > > never see the "attempting to configure eth0" message, rerun netconfig
and
> > > make sure you selected DHCP.  DHCP is the second choice, static IP is
the
> > > first.  DHCP only asks if you need to supply a hostname, and most of
us
> > > don't.  It mentions that Cox at home is an exception where you need to
> > > supply a hostname to DHCP.  Like I said, the card is definitely
> > > functioning.  Good luck
> > >
> > >
> > >
> > > _______________________________________________
> > > Speakup mailing list
> > > Speakup at braille.uwo.ca
> > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> > >
> >
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup at braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
>
>
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>