help whith d s l conection

[Gregory Nowak]

Your domain name is ameritech.net based on your e-mail address. To find out your host name under windows, do the following.
1. Go to start menu.
2. Go to settings.
3. Select control pannel.
4. Select networking.
5. Go down until your network cards tcp/ip protocal is selected, and tab over to and hit enter on properities.
Hit shift+tab and you'll land on the ip address tab. Arrow left, until you are on the dns configuration tab control. Hit the tab key, and you should be on radio buttons to enable or disable dns. Hit the tab key again, and you should be on an edit box. This edit box will have your hostname.

To configure your network under zipspeak, type
netconfig
. I know there is a dhcp choice there, but I've never configured a network interface for dhcp, so can't really help you there.
Hth.
Greg


On Tue, Mar 05, 2002 at 07:19:06AM -0500, Pete wrote:
> 
>   I need some help in configuring, in windows I am using a program/client
> called enternet 300 to conect.  I have an umsdos slackware 8.0 system
> installed on /dev/hda2 and am using loadlin to boot it.  The ethernet card
> and modem were detected during setup's probing and there didn't seem to be
> any problems.  The highspeed modem attached to the ethernet card how ever
> wasn't detected during setup.  How do I proceed from here?
>   Is there an enternet client for linux?
>   The next thing I got stuck on is host name and domane name, in windows it
> is serverassigned and dhcp is used for dns addresses.  I don't know any
> thing about the host or domane names. What are these?
>   Pete
> 
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup