amixer with sblive value

Edward L. Barnes ebarnes at enigma2.cjb.net
Thu Jul 18 12:49:40 EDT 2002


Hi there, thank you very much for that.
This list is great, I've definitely learned a great deal by 
participating in it.
Best regards to all!

Ed Barnes ebarnes at enigma2.cjb.net 

BTW Jim, I am indeed using Red Hat.

On Mon, 15 Jul 2002 
jwantz at hpcc2.hpcc.noaa.gov wrote:

> Ed, it would depend on what distribution you are running.  However in 
> Redhat I do this:
> chkconfig alsasound --levels 2345 on
> This makes sure that the alsasound script is executed if you enter any 
> of the run levels 2 through 5 upon start up.  By the way the chkconfig 
> command is extremely useful for disabling unwanted services:
> chkconfig gpm --levels 0123456 off
> 
> And you will never have to worry about that irritating message from gpm 
> stating that it can't find /dev/mouse when you reboot again!
> 
>      Jim Wantz WB0TFK
> On Mon, 15 Jul 
> 2002, Edward L. Barnes wrote:
> 
> > Hi there, thanks for your help, I actually tried alsamixer but I 
> > couldn't make heads nor tails out of it so I ended up using amixer 
> > instead.
> > Thanks to some pointers from Georgina via email and suggestions from the 
> > folks on the reflector last evening I've got things fixed up and I've 
> > also played a few mp3s and did a bit of stuff like that and am happy 
> > with my current settings, I did alsactl store to save them and alsasound 
> > is set to start automatically the next time I re-boot my machine, btw, 
> > I've had it up since early Saturday 
> > but I'm also wondering if there's anything I need to add anywhere such 
> > that the settings I currently have in place will be available when I 
> > re-boot or will the settings I currently have be available when I 
> > re-boot.
> > Thanks Toby and all for your patience and assistance with my inquiries.
> > Best to all.
> > 
> > Ed Barnes ebarnes at enigma2.cjb.net 
> > 
> > On 
> > Mon, 15 Jul 2002, Toby Fisher wrote:
> > 
> > > On Sun, 14 Jul 2002, Edward L. Barnes wrote:
> > > 
> > > > Hey folks.
> > > > Firstly, for anyone who subscribes to both blinux-newbie and speakup,
> > > > sorry for the cross-posting to both lists and any related inconvenience.
> > > > Secondly, a big Thank you to Bill Acker for his assisting me to get the
> > > > alsa drivers, libs, and utilities installed and with editing my
> > > > /etc/modules.conf last night.
> > > > After I finished speaking to Bill last night I began the task of unmuting
> > > > the various features of my sound card as needed.
> > > > I looked at man amixer and did a search or two via the internet to find
> > > > out what the best settings would be to use for my particular card and to
> > > > find the names of the relevant options so I could pass the correct command
> > > > line sequences to amixer and I found a bit of stuff and fooled around
> > > > some, however; I wasn't overly successful. I am curious if there are any
> > > > sblive owners on either of these lists who would be so kind  as to give me
> > > > some pointers in regard to the settings they use and find most effective
> > > > along with how to pass them to amixer and save them. As I said to Bill
> > > > last night on the phone I am the sort of person who likes to read and
> > > > understand why I am doing something and to a point the theory behind what
> > > > I'm doing as well, so I find everything I've done with Alsa particularly
> > > > challenging as the docs are confusing in my opinion and for that matter
> > > > there isn't that muchy good documentation available anyway in my humble
> > > > opinion.
> > > 
> > > Hi.
> > > Well, if you just type amixer, you may want to output to a file, it'll
> > > tell you all controls available to your card, and for the sblive it's a
> > > lot, then you can use amixer set <control> <value set> where value set can
> > > be a number from 0 to the max allowed, or a number followed by the percent
> > > sign, for setting volume, unmute is self-explanitory and record allows
> > > capture of the particular input.
> > > 
> > > For example, you might want a setting like:
> > > amixer set Mic 100% mute record
> > > 
> > > You don't want the mic unmuted as you will get feedback as you will here
> > > the mike's input in your speakers.
> > > 
> > > Your other alternative is to look at alsamixer.  It's a bit confusing, but
> > > is workable to a fashion with some patience.
> > > 
> > > Cheers.
> > > 
> > > 
> > 
> > 
> > _______________________________________________
> > Speakup mailing list
> > Speakup at braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> > 
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
> 





More information about the Speakup mailing list