net card drivers/possible conflict.

[Jim Danley]

Need more input.

Which synthesizer are you using with speakup?

Is this PCI or ISA hardware?

Which I/O addresses and which IRQ's are the nic and synth using?

Speakup itself is probably not the problem, but if your hardware synth
is at the same address as the nic and speakup registers the region, then
the nic is out of luck until it is located to another I/O address range.

	Jim

On Tue, Jul 10, 2001 at 10:43:57AM -0400, JONATHAN CREASY wrote:
> Ok, this seems unlikely to me but I am having a problem that suggests
> there is a conflict between having the 3com Etherlink III selected and
> speakup selected in my Kernel. I used the same configuration and when
> speakup and the therlink card are selected the nic doesn't work, when I
> unchoose the speakup option and recompile, the nic works. Any
> suggestions? 
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup