LiteTalk 3.22 problem

[Watson, Keith]

Josh,

echo value > /proc/speakup/rate

where rate is a value, not sure of the high end, but mine is set to 450.

Keith

-----Original Message-----
From: Josh Redmond [mailto:bjr at tech21.com]
Sent: Tuesday, August 28, 2001 9:44 PM
To: speakup at braille.uwo.ca
Subject: RE: LiteTalk 3.22 problem


I got the problem solved.
I just had to be a litte more patient upon bootup.
(I got smart and viewed dmesg.)
I also switched serial ports, that seemed to speed it up a little.

One thing I do know is that the client will want it to talk faster.

Thanks for all the help!!

Josh

-----Original Message-----
From: speakup-admin at braille.uwo.ca
[mailto:speakup-admin at braille.uwo.ca]On Behalf Of Tommy Moore
Sent: Tuesday, August 28, 2001 5:29 PM
To: speakup at braille.uwo.ca
Subject: Re: LiteTalk 3.22 problem


Hi Josh. when you installed speakup on the machine did you use the stable
0.10a version or did you use the cvs version?
Actually since this is a Red Hat machine you can use the kernel rpm
packages that have speakup enabled in them from:
http://198.172.228.165/rh7.1/RedHat/RPMS
All you have to add to the lilo command line is
append = "speakup_synth=ltlk"
Hopefully this should work. If not try adding the speakup_ser=0 option to
the line as well.

Tommy




_______________________________________________
Speakup mailing list
Speakup at braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup


_______________________________________________
Speakup mailing list
Speakup at braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup