Redhat6.1 boot disks with Speakup don't seem to work withDoubleTalkLT
frankiec at unforgettable.com
frankiec at unforgettable.com
Mon May 15 01:51:24 EDT 2000
Yeah. If anyone knows how to get the syslinux prompt to use the serial
port please let us know.
FC
On Sun, 14 May 2000, Victor Tsaran wrote:
> So , perhaps what I have to do is to look into RedHat reference manual and
> see if there is a way to make syslinux talk at the bot. Right?
> Vic
>
> ----- Original Message -----
> From: <frankiec at unforgettable.com>
> To: <speakup at braille.uwo.ca>
> Sent: Sunday, May 14, 2000 11:21 AM
> Subject: Re: Redhat6.1 boot disks with Speakup don't seem to work
> withDoubleTalkLT
>
>
> > Hi there Victor
> >
> > Well yes this is what I am talking about. However the redhat boot disks
> > use syslinux instead of lilo as there boot loader.
> >
> > I haven't gotten a chance to work on the slackware bootdisks with the
> > talking lilo yet.
> >
> > FC
> >
> >
> > On Sun, 14 May 2000, Victor Tsaran wrote:
> >
> > > Date: Sun, 14 May 2000 02:00:47 -0700
> > > From: Victor Tsaran <vtsaran at nimbus.ocis.temple.edu>
> > > Reply-To: speakup at braille.uwo.ca
> > > To: speakup at braille.uwo.ca
> > > Subject: Re: Redhat6.1 boot disks with Speakup don't seem to work
> > > withDoubleTalkLT
> > >
> > > Actually, I once succedded to have LILO talk on a Redhat system. is that
> the
> > > trestriction you speak of?
> > > Regards,
> > > Vic
> > >
> > > ----- Original Message -----
> > > From: <frankiec at unforgettable.com>
> > > To: <speakup at braille.uwo.ca>
> > > Sent: Friday, May 12, 2000 3:58 AM
> > > Subject: Re: Redhat6.1 boot disks with Speakup don't seem to work
> > > withDoubleTalkLT
> > >
> > >
> > > > Vic
> > > > I think I know what your problem is. It won't be fixed by the
> > > > speakup_ser variable. If it would be fixed by the speakup_ser kernel
> > > > parameter you would type "text speakup_ser=0" because you are using
> com1,
> > > > which is ttyS0.
> > > >
> > > > I am going to guess that you have the problem with these machines that
> I
> > > > have with lots of machines that I get my hands on. If you can wait
> until
> > > > later on this weekend sometime I will try to build some speakup
> slackware
> > > > bootdisks with the talking lilo prompt. I have found that on at least
> one
> > > > system this has solved the detection of serial synths problem.
> > > >
> > > > The issue is that the uarts aren't awake until data gets sent through
> > > > them. Don't ask me why because I have no freekin idea. All I can
> tell
> > > > you is that this baffled me for about four months until I started
> really
> > > > understanding there behavior. This took that long for me to really
> see
> > > > what was going on. I couldn't narrow it down because of all of the
> > > > variables. I think that we are going to need to come up with a fix
> for
> > > > these problems at the speakup level but for now this is a fix.
> > > >
> > > > I can't make redhat do this because it uses syslinux and I don't think
> > > > that you can use the serial port terminal with this boot loader.
> Someone
> > > > please correct me if I am in error on this one.
> > > >
> > > > Hope this helps.
> > > >
> > > > FC
> > > >
> > > >
> > > > On Fri, 12 May 2000, Janina Sajka wrote:
> > > >
> > > > > Date: Fri, 12 May 2000 07:27:34 -0400 (EDT)
> > > > > From: Janina Sajka <janina at afb.net>
> > > > > Reply-To: speakup at braille.uwo.ca
> > > > > To: speakup at braille.uwo.ca
> > > > > Subject: Re: Redhat6.1 boot disks with Speakup don't seem to work
> > > > > withDoubleTalk LT
> > > > >
> > > > >
> > > > > Hi, Voictor:
> > > > >
> > > > > At the boot prompt, when you're booting from the ltlkb floppy image
> you
> > > > > need to type all of the following on one line before pressing enter:
> > > > >
> > > > > text speakup_ser=1
> > > > >
> > > > > At least, that's what uncorked the genie in my bottle. Your mileage
> may
> > > > > vary, but it sounds like you didn't give the speakup variable a go.
> > > > >
> > > > > Janina
> > > > >
> > > > > On Thu, 11 May 2000, Victor Tsaran wrote:
> > > > >
> > > > > > Janina, I did what you suggested, but nothing works still. Here is
> > > what I
> > > > > > did:
> > > > > >
> > > > > > downloaded ltlkb.bin
> > > > > >
> > > > > > with rawrite copied it onto an empty floppy.
> > > > > > Connected Doubletalk LT to com1, both machines are desktops, BTW.
> > > > > > Reboot computer, prompt comes up. I type
> > > > > >
> > > > > > text <ENTER>
> > > > > >
> > > > > > The booting process proceeds as if there is no speakup built-in.
> > > > > > Do you have any other suggestions?
> > > > > > Vic
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Janina Sajka" <janina at afb.net>
> > > > > > To: <speakup at braille.uwo.ca>
> > > > > > Cc: <speakup at speech.braille.uwo.ca>
> > > > > > Sent: Thursday, May 11, 2000 1:13 PM
> > > > > > Subject: Re: Redhat6.1 boot disks with Speakup don't seem to work
> > > > > > withDoubleTalk LT
> > > > > >
> > > > > >
> > > > > > > Vic:
> > > > > > >
> > > > > > > I had the same problem with my IBM Thinkpad 560Z.
> > > > > > >
> > > > > > > The issue turned out to be that the serial port on the
> backplane of
> > > the
> > > > > > > Thinkpad was being seen by Linux as ttyS1. Seems the irda port
> on
> > > the
> > > > > > > front plane is ttyS0. So, the fix was to add the following at
> the
> > > boot
> > > > > > > prompt:
> > > > > > >
> > > > > > > speakup_ser=1
> > > > > > >
> > > > > > > so my boot prompt response became:
> > > > > > >
> > > > > > > text speakup_ser=1
> > > > > > >
> > > > > > > That did it.
> > > > > > > On Thu, 11 May 2000, Victor Tsaran
> > > > > > > wrote:
> > > > > > >
> > > > > > > > I downloaded the boot disk for RedHat6.1, ltlkb.bin, and
> copied it
> > > onto
> > > > > > a
> > > > > > > > floppy. I tried it on two machines and in both cases the
> machines
> > > > > > booted, but
> > > > > > > > no speech ever came up. Anyone have an idea why this behavior?
> > > > > > > > Vic
> > > > > > > >
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > Speakup mailing list
> > > > > > > > Speakup at braille.uwo.ca
> > > > > > > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > Speakup mailing list
> > > > > > > Speakup at braille.uwo.ca
> > > > > > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > Speakup mailing list
> > > > > > Speakup at braille.uwo.ca
> > > > > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> > > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Speakup mailing list
> > > > > Speakup at braille.uwo.ca
> > > > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> > > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Speakup mailing list
> > > > Speakup at braille.uwo.ca
> > > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> > >
> > >
> > > _______________________________________________
> > > Speakup mailing list
> > > Speakup at braille.uwo.ca
> > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> > >
> >
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup at braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
>
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
More information about the Speakup
mailing list