No subject

extention).  You should already have all the files in c:\linux or
some_drive:\linux.

Then edit c:\linux\linux.bat.  You'll need a line like this:
\linux\loadlin \linux\ltlk root=something rw
In the above, replace something with your hard disc.  I get the impression
that you know enough about computers to understand what I'm going to say
next:

hda is the first ide hard disc, hdb the second ide drive etc.
similarly you have sda and sdb for scsi discs.
then you also need the partition number, which start at one.  So hda1 is the
first partition on the first ide drive, and sdb3 is the third partition on
the second scsi drive.  Do you get all this?
in any case replace this in the line i gave you and comment out / delete the
rest of linux.bat.  so to recap your linux.bat file should look something
like
\linux\loadlin \linux\ltlk root=/dev/hda1 rw

Hope this helps and don't hesitate to contact me for further help.

Saqib Shaikh ss at saqibshaikh.com

----- Original Message -----
From: "Jason Symes" <jsymes at netins.net>
To: <speakup at braille.uwo.ca>
Sent: Friday, December 21, 2001 6:52 PM
Subject: oops


> Another thing I forgot to mention in my post. I'm running a doubletalk lt
> on my com1 port. Being that I've never tried any os not produced by ms,
I'm
> not sure how to start ZipSpeak with the doubletalk lt. I checked the
> readme.1st and the zipspeak.txt files in the same ftp folder as the
> zipspeak.zip file, and I gathered that I had to download the lt's boot
disk
> image and create a boot floppy with that image file decoder (the file's
> name escapes me). Is this correct, or is there a shorter way for a linux
> novice to start the lt?
> tia, and merry Christmas.
>
> Jason Symes
>
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup