problem with voxin and speakup

[Berkó Norbert]

Hello,

I using speech-dispatcher 0.6.8~unofficial~rc1. The 
speech-dispatcher-voxin is 0.6.7.
How can i make a correct speech-dispatcher-voxin .deb packages? I have 
got my own ppa.

Norbert.


> Your setup looks right.  The problem is likely incompatibility between
> the latest speech-dispatcher from Luke and the sd_ibmtts file I
> compiled for my previous version of speech-dispatcher.
>
> What exact version of speech-dispatcher do you have?
>
> Bill
>
> On Fri, Feb 12, 2010 at 1:08 AM, Berkó Norbert<berko.norbert at gmail.com>  wrote:
>
>> Hy all,
>>
>> I using ubuntu lucid 32 bit system.
>> I installed speech-dispatcher-voxin from vinux lucid ppa.
>> I running speech-dispatcher as a system daemon, so I removed comment before
>> ibmtts line in /etc/speech-dispatcher/speechd.conf, and enabled port 6560.
>> Pulseaudio running as a system daemon.
>> My default module is ibmtts. I would like to use speakup with speechd-up and
>> voxin.
>> If i running speech-dispatcher  with espeak, speakup works well.
>>   I would like to use espeakup, but do not work well with pulseaudio.
>> This is my speechd.conf file:
>>
>> # Global configuration for Speech Dispatcher
>> # ==========================================
>>
>> # -----SYSTEM OPTIONS-----
>>
>> # The Port on which Speech Dispatcher should be available
>> # to clients.
>>
>> Port 6560
>>
>> # By default, the specified port is opened only for connections
>> # comming from localhost. If LocalhostAccessOnly is set to 0 it
>> # disables this access controll. It means that the port will be
>> # accessible from all computers on the network. If you turn off this
>> # option, please make sure you set up some system rules on what
>> # computers are and are not allowed to access the Speech Dispatcher
>> # port.
>>
>> # LocalhostAccessOnly 1
>>
>> # -----LOGGING CONFIGURATION-----
>>
>> # The LogLevel is a number between 0 and 5 that specifies
>> # how much of the logging information should be printed
>> # out on the screen or in the logfile (see LogFile)
>> # 0 means nothing, 5 means everything (not recommended).
>>
>> LogLevel  0
>>
>> # The LogDir specifies where Speech Dispatcher writes its logging messages
>> # (status information, error messages, etc.).  Specify "stdout" for
>> # standard console output or a directory path. 'default' means that
>> # the logs are written to the default destination (e.g. a preconfigured
>> # system directory or the home directory if .speech-dispatcher is present)
>> # DO NOT COMMENT OUT THIS OPTION, SET IT TO "default" if you do not
>> # want to influence it.
>>
>> LogDir  "default"
>> #LogDir  "/var/log/speech-dispatcher/"
>> #LogDir  "stdout"
>>
>> # The CustomLogFile allows logging all messages of the given kind,
>> # regardless their priority, to the given destination.
>>
>> #CustomLogFile "protocol"
>> "/var/log/speech-dispatcher/speech-dispatcher-protocol.log"
>>
>> # ----- VOICE PARAMETERS -----
>>
>> # The DefaultRate controls how fast the synthesizer is going to speak.
>> # The value must be between -100 (slowest) and +100 (fastest), default
>> # is 0.
>>
>> # DefaultRate  0
>>
>> # The DefaultPitch controls the pitch of the synthesized voice.  The
>> # value must be between -100 (lowest) and +100 (highest), default is
>> # 0.
>>
>> # DefaultPitch  0
>>
>> # The DefaultVolume constrols the default volume of the voice.  It is
>> # a value between -100 (softly) and +100 (loudly).  Currently, +100
>> # maps to the default volume of the synthesizer.
>>
>> DefaultVolume 100
>>
>> # The DefaultVoiceType controls which voice type should be used by
>> # default.  Voice types are symbolic names which map to particular
>> # voices provided by the synthesizer according to the output module
>> # configuratuion.  Please see the synthesizer-specific configuration
>> # in etc/speech-dispatcher/modules/ to see which voices are assigned to
>> # different symbolic names.  The following symbolic names are
>> # currently supported: MALE1, MALE2, MALE3, FEMALE1, FEMALE2, FEMALE3,
>> # CHILD_MALE, CHILD_FEMALE
>>
>> # DefaultVoiceType  "MALE1"
>>
>> # The Default language with which to speak
>>
>> # DefaultLanguage "en"
>>
>>
>> # ----- MESSAGE DISPATCHING CONTROLL -----
>>
>> # The DefaultClientName specifies the name of a client who didn't
>> # introduce himself at the beginning of an SSIP session.
>>
>> # DefaultClientName  "unknown:unknown:unknown"
>>
>> # The Default Priority. Use with caution, normally this shouldn't be
>> # changed globally (at this place)
>>
>> # DefaultPriority  "text"
>>
>> # The DefaultPauseContext specifies by how many index marks a speech
>> # cursor should return when resuming after a pause. This is roughly
>> # equivalent to the number of sentences before the place of the
>> # execution of pause that will be repeated.
>>
>> # DefaultPauseContext 0
>>
>> # -----SPELLING/PUNCTUATION/CAPITAL LETTERS  CONFIGURATION-----
>>
>> # The DefaultPunctuationMode sets the way dots, comas, exclamation
>> # marks, question marks etc. are interpreted.  none: they are ignored
>> # some: some of them are sent to synthesis (see
>> # DefaultPunctuationSome) all: all punctuation marks are sent to
>> # synthesis
>>
>> # DefaultPunctuationMode "none"
>>
>> # The DefaultCapLetRecognition: if set to "spell", capital letters
>> # should be spelled (e.g. "capital b"), if set to "icon",
>> # capital letters are indicated by inserting a special sound
>> # before them but they should be read normally, it set to "none"
>> # capital letters are not recognized (by default)
>>
>> # DefaultCapLetRecognition  "none"
>>
>> # The DefaultSpelling: if set to On, all messages will be spelled
>> # unless set otherwise (this is usually not something you want to do.)
>>
>> # DefaultSpelling  Off
>>
>> # ----- AUDIO CONFIGURATION -----------
>>
>> # -- AUDIO OUTPUT --
>>
>> # Chooses between three possible sound output systems:
>> #       "oss"   - Open Sound System
>> #       "alsa"  - Advanced Linux Sound System
>> #       "nas"   - Network Audio System
>> #       "pulse" - PulseAudio
>> # ALSA is default and recommended. The recent implementations
>> # support mixing of multiple streams. OSS is only provided
>> # for compatibility with architectures that do not include ALSA.
>> # NAS is an audio server with higher level of control over
>> # your audio stream, with the possibility to stream your audio
>> # over the network to a different computer and other advanced
>> # features. (The NAS backend is not very well tested however.)
>> # PulseAudio is a sound server for POSIX and WIN32 systems.
>> #
>>
>> # AudioOutputMethod "pulse,alsa"
>>
>> # What ALSA device to use when Advanced Linux Sound Architecture is
>> # chosen for the audio output.
>>
>> #AudioALSADevice "default"
>>
>> # -- PulseAudio parameters --
>>
>> #AudioPulseServer "default"
>>
>> # Maximum length of the buffer
>>
>> #AudioPulseMaxLength -1
>>
>> # Target length of the buffer
>> # The server tries to assure that at least FestivalPulseTargetLength
>> # bytes are always available in the buffer
>>
>> #AudioPulseTargetLength 4410
>>
>> # Pre-buffering
>> # The server does not start with playback before at least
>> # FestivalPulsePrebuffering bytes are available in the buffer
>>
>> #AudioPulsePreBuffering -1
>>
>> # Minimum request
>> # The server does not request less than FestivalPulseMinRequest bytes
>> # from the client, instead waits until the buffer is free enough to
>> # request more bytes at once
>>
>> #AudioPulseMinRequest -1
>>
>> # -- OSS parameters --
>>
>> # What OSS device to use when Open Sound System is
>> # chosen for the audio output.
>>
>> #AudioOSSDevice "/dev/dsp"
>>
>> # -- NAS parameters --
>>
>> # Route to the Network Audio System server when NAS
>> # was chosen for the audio output. Note that NAS
>> # server doesn't need to run on your machine,
>> # you can use it also over network (for instance
>> # when working on remote machines).
>>
>> #AudioNASServer "tcp/localhost:5450"
>>
>>
>>
>> # -----OUTPUT MODULES CONFIGURATION-----
>>
>> # Each AddModule line loads an output module.
>> #  Syntax: AddModule "name" "binary" "configuration" "logfile"
>> #  - name is the name under which you can acces this module
>> #  - binary is the path to the binary executable of this module,
>> #    either relative (to lib/speech-dispatcher-modules/) or absolute
>> #  - configuration is the path to the config file of this module,
>> #    either relative (to etc/speech-dispatcher/modules/) or absolute
>>
>> AddModule "espeak"       "sd_espeak"   "espeak.conf"
>> #AddModule "festival"     "sd_festival"  "festival.conf"
>> #AddModule "flite"        "sd_flite"     "flite.conf"
>> #AddModule "ivona"     "sd_ivona"    "ivona.conf"
>> #AddModule "espeak-generic" "sd_generic" "espeak-generic.conf"
>> #AddModule "espeak-mbrola-generic" "sd_generic" "espeak-mbrola-generic.conf"
>> #AddModule "swift-generic" "sd_generic" "swift-generic.conf"
>> #AddModule "epos-generic" "sd_generic"   "epos-generic.conf"
>> #AddModule "dtk-generic"  "sd_generic"   "dtk-generic.conf"
>> AddModule "ibmtts"       "sd_ibmtts"    "ibmtts.conf"
>> #AddModule "cicero"        "sd_cicero"     "cicero.conf"
>>
>> # DO NOT REMOVE the following line unless you have
>> # a specific reason -- this is the fallback output module
>> # that is only used when no other modules are in use
>> AddModule "dummy"         "sd_dummy"      ""
>>
>> # The output module testing doesn't actually connect to anything. It
>> # outputs the requested commands to standard output and reads
>> # responses from stdandard input. This way, Speech Dispatcher's
>> # communication with output modules can be tested easily.
>>
>> # AddModule "testing"
>>
>> # The DefaultModule selects which output module is the default.  You
>> # must use one of the names of the modules loaded with AddModule.
>>
>> DefaultModule ibmtts
>>
>> # The LanguageDefaultModule selects which output modules are prefered
>> # for specified languages.
>>
>> #LanguageDefaultModule "en"  "espeak"
>> #LanguageDefaultModule "cs"  "festival"
>> #LanguageDefaultModule "es"  "festival"
>>
>> # -----CLIENT SPECIFIC CONFIGURATION-----
>>
>> # Here you can include the files with client-specific configuration
>> # for different types of clients. They must contain one or more sections
>> with
>> # this structure:
>> #     BeginClient "emacs:*"
>> #          DefaultPunctuationMode "some"
>> #          ...and/or some other settings
>> #     EndClient
>> # The parameter of BeginClient tells Speech Dispatcher to which clients
>> # it should apply this settings (it does glob-style matching, you can use
>> # * to match any number of characters and ? to match one character)
>>
>> # There are some sample client settings
>>
>> Include "/etc/speech-dispatcher/clients/*.conf"
>> Include "clients/*.conf"
>>
>> # This line below is to enable autospawning, without breaking everything
>> else read by dotconf.
>> # AutoSpawn
>>
>> What is the problem in my system?
>>
>> Thank you for your help, and sorry for my mistakes.
>>
>> Norbert
>> _______________________________________________
>> Speakup mailing list
>> Speakup at braille.uwo.ca
>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>>
>>
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
>