IBMTTS on slackware

Mon Jun 2 11:39:10 EDT 2008

Voxin requires a kernel recompile to build the cryptoloop and aes 
modules. 
On Mon, Jun 02, 2008 at 01:42:05PM +0100, Michael Whapples 
wrote:
> Good to hear that it is possible. Can I ask why you say voxin will be
> more of a problem? Considering the significant difference in price I
> would prefer to get voxin if possible. Its the high price of TTSynth
> which had made me question so much whether it would be worth the money,
> the question wasn't so high for voxin until you said that it might be
> more difficult on slackware. Might it be less painful if I were to use
> GRML for certain parts of voxin's install?
> 
> I may discuss things with the voxin people to see if I could get them to
> help me sort out a slackware version of voxin.
> 
> Michael Whapples
> On Sun, 2008-06-01 at 18:01 -0400, Nick Stockton wrote:
> > I know it's doable because I helped a friend set up their copy of ttsynth on 
> > their slackware box a while back.
> > I forget if it was slackware version 11 or 12 but I think the process would 
> > be the same for eather one.
> > I've not ever seen any instructions on the speakup list on how to do it so 
> > I'll write down what I did here.
> > Lucky for you I saved the commands I enterd to a text file so I'd know how 
> > it was done although I'm using voxin which I got for $5 and am running it 
> > under debian.
> > Note: this is for ttsynth under slackware. Voxin would be quite alot harder 
> > to get working under slackware so you better get ttsynth.
> > I've also prepended the commands with '$ ' in case my email client tries to 
> > wrap commands to the next line. So you'll be able to see where each line 
> > begins.
> > You will need to run all the commands as root. You also need to have alien 
> > installed.
> > If you don't want to find, download, compile and install alien and all the 
> > dependencies from source to your copy of slackware then you might want to 
> > download GRML and use it only to run the alien commands.
> > --------------------
> > $ wget 
> > http://http.us.debian.org/debian/pool/main/g/gcc-2.95/libstdc++2.10-glibc2.2_2.95.4-27_i386.deb
> > $ alien -t -c -k libstdc++2.10-glibc2.2_2.95.4-27_i386.deb
> > $ installpkg libstdc++2.10-glibc2.2-2.95.4.tgz
> > $ ldconfig
> > $ alien -t -c -k ttsynthcore-1.0-i386.deb
> > $ installpkg ttsynthcore-1.0.tgz
> > $ ln -s /opt/IBM/ibmtts/lib/enu50.so /usr/lib/enu50.so
> > $ ln -s /opt/IBM/ibmtts/lib/enumfilt.so /usr/lib/enumfilt.so
> > $ ln -s /opt/IBM/ibmtts/lib/ssmlfilter.so /usr/lib/ssmlfilter.so
> > $ cp /opt/IBM/ibmtts/inc/* /usr/include/
> > $ ldconfig
> > $ I know it's doable because I helped a friend set up their copy of ttsynth 
> > on their slackware box.
> > I forget if it was slackware version 11 or 12 but I think the process would 
> > be the same for eather one.
> > I've not ever seen any instructions on the speakup list on how to do it so 
> > I'll write down what I did here.
> > Lucky for you I saved the commands I enterd to a text file so I'd know how 
> > it was done although I'm using voxin which I got for $5 and am running it 
> > under debian.
> > Note: this is for ttsynth under slackware. Voxin would be quite alot harder 
> > to get working under slackware so you better get ttsynth.
> > I've also prepended the commands with '$ ' in case my email client tries to 
> > wrap commands to the next line. So you'll be able to see where each line 
> > begins.
> > You will need to run all the commands as root. You also need to have alien 
> > installed.
> > If you don't want to find, download, compile and install alien and all the 
> > dependencies from source to your copy of slackware then you might want to 
> > download GRML and use it to run the alien commands.
> > --------------------
> > $ wget 
> > http://http.us.debian.org/debian/pool/main/g/gcc-2.95/libstdc++2.10-glibc2.2_2.95.4-27_i386.deb
> > $ alien -t -c -k libstdc++2.10-glibc2.2_2.95.4-27_i386.deb
> > $ installpkg libstdc++2.10-glibc2.2-2.95.4.tgz
> > $ ldconfig
> > $ alien -t -c -k ttsynthcore-1.0-i386.deb
> > $ installpkg ttsynthcore-1.0.tgz
> > $ ln -s /opt/IBM/ibmtts/lib/enu50.so /usr/lib/enu50.so
> > $ ln -s /opt/IBM/ibmtts/lib/enumfilt.so /usr/lib/enumfilt.so
> > $ ln -s /opt/IBM/ibmtts/lib/ssmlfilter.so /usr/lib/ssmlfilter.so
> > $ cp /opt/IBM/ibmtts/inc/* /usr/include/
> > $ ldconfig
> > $ mknod /dev/softsynth c 10 26
> > --------------------
> > Hope this helps.
> > ----- Original Message ----- 
> > From: "Michael Whapples" <mwhapples at aim.com>
> > To: <speakup at braille.uwo.ca>
> > Sent: Sunday, June 01, 2008 3:33 PM
> > Subject: IBMTTS on slackware
> > 
> > 
> > 
> > > Hello,
> > > I know this has come up before, but I can't remember any actual final
> > > conclusion.
> > >
> > > Whilst I thought espeak was fast enough, I found I had to use a windows
> > > machine last week, and it reminded me how I do actually use eloquence in
> > > windows faster than I have espeak. This has got me thinking whether I
> > > should get IBMTTS for linux, but I have a few questions.
> > >
> > > I know that IBMTTS requires an old compatibility library, which I am
> > > unsure is provided in slackware. So how could I go about trying to get
> > > this library? Does anyone know of a suitable slackware package for it?
> > > If not how might I go about providing this myself from source (I had a
> > > look around for the source code I might need, but all libstdc++ seems to
> > > have numbers such as 6.0.x etc much highrt than what the TTSynth site
> > > suggests, 2.9.6 or 2.9.5). Could it be possible to use a package from a
> > > different distribution, eg. I remember back in the days when I used
> > > trplayer, I could use rpm2tgz to convert the realplayer 8 package into a
> > > slackware package and it worked fine, but I suspect that for libstdc++
> > > compatibility libraries things may not be so simple.
> > >
> > > This brings me on to another question, whether to use voxin or ttsynth?
> > > The ttsynth website says there won't be any support provided, so I guess
> > > this means if I buy ttsynth and can't get it working then I am on my own
> > > and may have wasted money on it. Might things be better with voxin,
> > > their website says that voxin includes the libstdc++ compatibility
> > > library (I guess for debian or ubuntu as those are the distros
> > > mentioned).
> > >
> > > Alternatively I am wondering whether it would be best save the money and
> > > stick with espeak as it is good and works, where as ibmtts sounds like I
> > > may hit all sorts of compatibility issues and potentially have no
> > > support from the seller.
> > >
> > > Michael Whapples
> > >
> > > _______________________________________________
> > > Speakup mailing list
> > > Speakup at braille.uwo.ca
> > > http://speech.braille.uwo.ca/mailman/listinfo/speakup 
> > 
> > 
> > 
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup

-- 
> You know you are "there" when you are known by your first name, and
> are recognized.
> Lemmie see, there is Madonna, and Linus, and ..... help me out here!
Bill ? ;-)
	-- From some postings on comp.os.linux.misc