installing remotely
Butch Bussen
butchb at shellworld.net
Sun Nov 12 23:42:17 EST 2006
I would have a fairly good idea. I've done it with windows machines. I
have my router set to start numbering at 100, and my other machines on
the network are numbered with static addresses below this, so first is
101. It comes up this way at firs anyhow when I install it with sighted
help and do my first login as root. Should work the same.
73s
Butch Bussen
wa0vjr
On Mon, 13 Nov
2006, Chris Norman wrote:
> What would be the point? You wouldn't know where the DHCP had put the
> computer... :-D
>
> Cheers,
>
> Chris Norman
> <!-- cnorman at rnibncw.ac.uk -->
> ----- Original Message -----
> From: "Butch Bussen" <butchb at shellworld.net>
> To: "Speakup is a screen review system for Linux." <speakup at braille.uwo.ca>
> Sent: Saturday, November 11, 2006 11:37 PM
> Subject: Re: installing remotely
>
>
>> What would you type if you wanted to use dhcp?
>> 73s
>> Butch Bussen
>> wa0vjr
>>
>> On Sat, 11 Nov 2006,
>> Janina Sajka wrote:
>>
>>> This is mostly correct. One suggestion:
>>>
>>> Rather than ksdevice=eth0, use the mac address to be very certain telnet
>>> will talk to the device you intend:
>>>
>>> ksdevice=aa:bb:cc:dd:ee:ff
>>>
>>> PS: The advice here references Fedora, none others.
>>>
>>> Tom Moore writes:
>>>> If my memory serves me right the instructions are:
>>>> At the boot prompt once you put the cd in the drive type:
>>>> Text telnet ksdev=/dev/eth0 ip=www.xxx.yyy.zzz netmask=www.xxx.yyy.zzz
>>>> gateway=www.xxx.yyy.zzz
>>>> /dev/eth0 being the first network card in the machine that Fedora
>>>> detects.
>>>> I believe you can use dhcp as well, but if you do that then you'll have
>>>> to
>>>> hunt around for the machine to see what ip it was given by the dhcp
>>>> server
>>>> so when I do an install like this I can always know where the machine
>>>> is.
>>>>
>>>> Tom
>>>>
>>>> -----Original Message-----
>>>> From: speakup-bounces at braille.uwo.ca
>>>> [mailto:speakup-bounces at braille.uwo.ca]
>>>> On Behalf Of Butch Bussen
>>>> Sent: Thursday, November 09, 2006 7:34 AM
>>>> To: Speakup is a screen review system for Linux.
>>>> Cc: RadSurfer at yahoo.com
>>>> Subject: installing remotely
>>>>
>>>> I've seen references on thist occasionally on either using telnet or a
>>>> "serial console" to install from another machine. What do I type at the
>>>> first prompt to do this?
>>>> I run an i r l p ham radio Linux box and have done four of these, but
>>>> always needed sighted help to do the initial install. Once I get up and
>>>> running I can use my windows machine witha terminal program and winscp
>>>> to
>>>> do what I need. Hoping there is a way to do this without sighted help.
>>>> 73s
>>>> Butch Bussen
>>>> wa0vjr
>>>>
>>>>
>>>> _______________________________________________
>>>> Speakup mailing list
>>>> Speakup at braille.uwo.ca
>>>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>>>>
>>>> --
>>>> No virus found in this incoming message.
>>>> Checked by AVG Free Edition.
>>>> Version: 7.1.409 / Virus Database: 268.14.0/524 - Release Date:
>>>> 11/8/2006
>>>>
>>>>
>>>> --
>>>> No virus found in this outgoing message.
>>>> Checked by AVG Free Edition.
>>>> Version: 7.1.409 / Virus Database: 268.14.0/524 - Release Date:
>>>> 11/8/2006
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Speakup mailing list
>>>> Speakup at braille.uwo.ca
>>>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>>>
>>> --
>>>
>>> Janina Sajka Phone: +1.202.595.7777
>>> Partner, Capital Accessibility LLC http://CapitalAccessibility.Com
>>>
>>> Marketing the Owasys 22C talking screenless cell phone in the U.S. and
>>> Canada--Go to http://ScreenlessPhone.Com to learn more.
>>>
>>> Chair, Accessibility Workgroup Free Standards Group (FSG)
>>> janina at freestandards.org http://a11y.org
>>>
>>> _______________________________________________
>>> Speakup mailing list
>>> Speakup at braille.uwo.ca
>>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>>>
>>
>> _______________________________________________
>> Speakup mailing list
>> Speakup at braille.uwo.ca
>> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
>
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>
More information about the Speakup
mailing list