flashing dectalk

[Saqib Shaikh]

You wouldn't happen to be doing this with Speakup loaded and using the
DECTalk?  This won't work unless the serial port is free.

Saqib
 

> -----Original Message-----
> From: speakup-bounces at braille.uwo.ca 
> [mailto:speakup-bounces at braille.uwo.ca] On Behalf Of Igor Gueths
> Sent: 04 February 2004 21:29
> To: Speakup is a screen review system for Linux.
> Subject: Re: flashing dectalk
> 
> Hmmm. This is very weird...I'm still not getting the firmware 
> version. I tried echo "[:ver speak]" >/dev/ttyS0 and that 
> gotme back to the prompt. 
> I also did /dev/ttys0 and I got an input/output error. I 
> wonder what echo is doing to the command? 
> On Wed, Feb 04, 2004 at 03:07:27PM -0500, Whitley CTR Cecil H wrote:
> > Igor,
> > Try:
> > echo "[:ver speak]" >/dev/ttys0
> > Linux may be trying to replace the [ or ]?  Enclosing it in 
> quotes may help.
> > Yes, I pulled the command straight out of the manual and 
> tested on my 
> > system (Win NT 4).
> > Sorry I couldn't provide more definative answers.
> > Cecil
> > _______________________________________________
> > Speakup mailing list
> > Speakup at braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>