recommended Alsa version for an AWE64?

[igueths at attbi.com]

Hi Chuck. As I probably mentioned earlier, remove 
isapnp.h out of $prefix/alsa-0.9.0rc3/include. Then 
reconfigure and remake. 
> Hi Igor/Adam,
> 
> I left isapnp support out of my kernel when compiling it, and
> configured the alsa-drivers using --without-isapnp and
> --with-oss.
> 
> But my sound card is a PCI device, sblive.
> 
> Not sure what else I did this time that made it work okay.
> 
> 
> On Thu, 17 Oct 2002, Igor Gueths wrote:
> 
> > Oh one other thing. What did you include as configure cmdline?
> >
> > Microsoft dialogue
> > This company has performed an illegal operation and will be shutdown. If this 
> problem persists, delete Winblows and install Linux. Close button
> >
> > On Thu, 17 Oct 2002, Adam Myrow wrote:
> >
> > > On Thu, 17 Oct 2002, Igor Gueths wrote:
> > >
> > > > Hi Adam. Did you try rc3? Or any of the 'rc' versions? Also, what modules
> > > > did you have loaded Did you have snd-mixer-oss loaded (if using rc3)?
> > >
> > > I tried RC3 and it never would compile.  I still have the errors from
> > > attempts to compile it.  If possible, I'd rather use a later version as I
> > > figure that it'll hopefully be less buggy.  Anyhow, here is a sample of
> > > the errors I was getting when trying to build the driver.
> > >
> > > About halfway down:
> > >
> > > pdplus.c:3032: warning: #warning "This driver need to be ported to new 
> hw_info"
> > > pdplus.c:3082: warning: #warning "This driver need to be ported to new 
> hw_info"
> > > pdplus.c:3107: warning: #warning "This driver need to be ported to new 
> hw_info"
> > > pdplus.c:3136: warning: #warning "The S/PDIF setup code needs to be 
> rewritten."
> > > pdplus.c:3212: warning: #warning "This driver need to be ported to new 
> hw_info"
> > >
> > > Some time later:
> > >
> > >                  from 
> /usr/src/alsa-driver-0.9.0rc3/include/sound/driver.h:43,
> > >                  from ../alsa-kernel/core/hwdep.c:22,
> > >                  from hwdep.c:1:
> > > /usr/src/alsa-driver-0.9.0rc3/include/linux/isapnp.h:334: warning: `struct
> > > isapnp_card_id' declared inside parameter list
> > > /usr/src/alsa-driver-0.9.0rc3/include/linux/isapnp.h:334: warning: its
> > > scope is only this definition or declaration, which is probably not what
> > > you want.
> > >
> > > This last error repeats over and over and finally, the build would bomb
> > > out with:
> > >
> > > sound.c:41: `snd_hack_usb_set_interface' undeclared here (not in a
> > > function)
> > > sound.c:41: initializer element is not constant
> > > sound.c:41: (near initialization for
> > > `__ksymtab_snd_hack_usb_set_interface.value')
> > > make[1]: *** [sound.o] Error 1
> > > make[1]: Leaving directory `/usr/src/alsa-driver-0.9.0rc3/acore'
> > > make: *** [compile] Error 1
> > >
> > > Looking at this more closely, it may be choking on the fact that I don't
> > > have USB on this machine and thus don't include USB support in my kernel.
> > > any ideas?
> > >
> > >
> > >
> > > _______________________________________________
> > > Speakup mailing list
> > > Speakup at braille.uwo.ca
> > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> > >
> >
> >
> > _______________________________________________
> > Speakup mailing list
> > Speakup at braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> >
> 
> -- 
> The Moon is Waxing Gibbous (91% of Full)
> So visit me at http://www.valstar.net/~hallenbeck
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup