cdrom/cdr trouble or ide1 problem: BIG TROUBLE I think

[Kerry Hoath]

Ok you are most likely looking at hardware failure.
Plug 1 device into the chain at a time and make sure it assigns an irq to ide1
and shows either device.
the device plugged in should show as scsi 0,0,0

Regards, Kerry.
On Tue, May 28, 2002 at 12:00:54AM -0500, Cheryl Homiak wrote:
> Hi all.
> Well, I also just tried using a rescue and root disk to see what would come up
> with my cdroms. the same thing happened as with zipspeak. hdc ic recognized and
> usable; when I try to mount hdd I get something a little bit different: about
> the device not being configured. Why my debian sid system is totally failing
> even to assign an irq to ide1 I don't know, but at least one cdrom should be
> functioning.
> The scsi driver and scsi emulation are mentioned in the dmesg, so the scsi isn't
> the source of the problem.
> 
> Cheryl
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
> 

-- 
Kerry Hoath:  kerry at gotss.net kerry at gotss.eu.org or  kerry at gotss.spice.net.au
ICQ: 8226547 msn: kerry at gotss.net Yahoo: kerryhoath at yahoo.com.au