samba misbehaving again

Gregory Nowak gnowak1 at uic.edu
Tue Mar 12 14:56:42 EST 2002


I actually wasn't worried about the samba service being available on the net, as my firewall is set to block samba on the external interface, and to only allow it on the internal interface. I have done in my smb.conf what you suggested in your previous post, but I've still got the same problem. If someone could please take a look at my smb.conf and see if the problem maybe lerking in there, I would appreciate it. Thanks.
Greg


On Tue, Mar 12, 2002 at 01:30:00PM +0800, Kerry Hoath wrote:
> If you have multiple interfaces tell samba which ones to
> listen on, you probably don't want smb trafic ont he internet
> since it isn't secure and passwords are easily breakable,
> the lm hash isn't that strong.
> 
> Regards, Kerry.
> On Mon, Mar 11, 2002 at 03:13:57PM -0600, Gregory Nowak wrote:
> > Thanks kerry,
> > 
> > I'm slightly confused though. I have a nic for the internet, and another nic for my intranet. Does changing the interface listening setup still apply?
> > Greg
> > 
> > 
> > On Mon, Mar 11, 2002 at 03:55:58PM +0800, Kerry Hoath wrote:
> > > If your machine is multi-homed i.e. has more than one interface,
> > > tell samba which interfaces to listen on in the [global] section
> > > of the configuration file like this:
> > > interfaces=192.168.1.1/255.255.255.0
> > > Note that you specify the ip address of the interface and the netmask not the network address
> > > and netmask. If a ppp or other link goes up or down whilst
> > > samba is running it can have trouble figuring out what interfaces it should be listening on.
> > > Also, you should set
> > > wins support=yes
> > > and point all other samba machines and windows machines at the 1 (one) wins
> > > server. This eliminates problems with broadcast trafic not
> > > crossing subnet boundaries and greatly enhances name resolution.
> > > 
> > > Regards, Kerry.
> > > On Sun, Mar 10, 2002 at 10:13:32PM -0600, Gregory Nowak wrote:
> > > > Hi everyone,
> > > > 
> > > > I've got samba troubles again. I swear that I didn't modify anything on this machine. If I did, I can't remember doing it, and I'm not sure what's going on. I checked inetd.conf, the samba logs, hosts.deny, hosts.allow, and of course smb.conf, but everything is as it should be. When I try to connect to my main samba machine with windblows, th main samba machine is not in the list of machines. When I use smbmount from another linux box, I get something like:
> > > > 
> > > > x protocal negotiation failed. smb connection failed.
> > > > 
> > > > In this case, x is 116, 118, 120, 122, or 124. The strange thing is that there is nothing in the samba logs. However, when I do:
> > > > 
> > > > smbmount //localhost/storage /mnt
> > > > 
> > > > on the main samba machine, I get asked for the password, and the directory is mounted. Any ideas on what the problem is? Thanks in advance.
> > > > Greg
> > > > 
> > > > 
> > > > _______________________________________________
> > > > Speakup mailing list
> > > > Speakup at braille.uwo.ca
> > > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> > > > 
> > > 
> > > -- 
> > > Kerry Hoath:  kerry at gotss.net kerry at gotss.eu.org or  kerry at gotss.spice.net.au
> > > ICQ: 8226547 msn: kerry at gotss.net Yahoo: kerryhoath at yahoo.com.au
> > > 
> > > _______________________________________________
> > > Speakup mailing list
> > > Speakup at braille.uwo.ca
> > > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> > 
> > _______________________________________________
> > Speakup mailing list
> > Speakup at braille.uwo.ca
> > http://speech.braille.uwo.ca/mailman/listinfo/speakup
> > 
> 
> -- 
> Kerry Hoath:  kerry at gotss.net kerry at gotss.eu.org or  kerry at gotss.spice.net.au
> ICQ: 8226547 msn: kerry at gotss.net Yahoo: kerryhoath at yahoo.com.au
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
-------------- next part --------------
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not many any basic syntactic errors. 
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name, eg: LINUX2
   workgroup = homelan

# server string is the equivalent of the NT Description field
   server string = Samba Server

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
;   hosts allow = 192.168.0. 127.

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
   load printers = yes

# you may wish to override the location of the printcap file
;   printcap name = /etc/printcap

# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
;   printcap name = lpstat

# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
;   printing = bsd

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Security mode. Most people will want user level security. See
# security_level.txt for details.  NOTE:  To get the behaviour of
# Samba-1.9.18, you'll need to use "security = share".
   security = share

# Use password server option only with security = server
# The argument list may include:
#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
#   password server = *
;   password server = <NT-Server-Name>

# Note: Do NOT use the now deprecated option of "domain controller"
# This option is no longer implemented.

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
;  encrypt passwords = yes

# Where to find the SSL certificates:
   ssl CA certDir = /etc/ssl/certs

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /usr/local/samba/lib/smb.conf.%m

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
# You may want to add the following on a Linux system:
;         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY 

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
   interfaces = 192.168.0.1/24 

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes 

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;   preferred master = yes

# Enable this if you want Samba to be a domain logon server for 
# Windows95 workstations. 
;   domain logons = no

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one	WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
   dns proxy = no 

#============================ Share Definitions ==============================
;[homes]
;   comment = Home Directories
;   browseable = no
;   writable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /usr/local/samba/lib/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /usr/local/samba/profiles
;    browseable = no
;    guest ok = yes

# Public storage space.
[storage]
comment = storage
path = /storage
read only = no
writeable = yes
browseable = yes
 guest ok = yes

# NOTE: If you have a BSD-style print system there is no need to 
# specifically define each individual printer
;[printers]
;   comment = All Printers
;   path = /var/spool/samba
;   browseable = no
# Set public = yes to allow user 'guest account' to print
;   guest ok = no
;   writable = no
;   printable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba
;   public = yes
;   writable = yes
;   printable = no
;   write list = @staff

# Other examples. 
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765




More information about the Speakup mailing list