Installation help

Georgina gena at gena-j.net
Sat Sep 29 21:01:13 EDT 2001


Hi

Can someone tell me how a message that I've replied to has jumped lists?  I
just hope that the person who raised
the question is a member of this list too.

-----Original Message-----
From: speakup-admin at braille.uwo.ca
[mailto:speakup-admin at braille.uwo.ca]On Behalf Of Georgina
Sent: 30 September 2001 00:03
To: speakup at braille.uwo.ca
Subject: RE: Installation help


Hi

If I understand your set-up right, your easiest option would be to use
loadlin.  This would require that you have the files Linux, root.bin,
drivers.gz and the base2.2.tar.gz.  I may not have the filenames exactly
right but hopefully you'll know which ones I mean.  If you also had a copy
of loadlin.exe on your system or even in the same directory as the other
files you can use it to boot the system into Linux and start your
installation.

Say for example, you create a directory called c:\Linux and that you put all
the above files into the Linux directory.  You'd create a batch file
something like this:

@echo off
cd\
cd c:\Linux
loadlin Linux /dev/ram intrd-root.bin

Then you'd start the machine in pure DOS and type the name of the batch file
you've just created with the above lines.  BTW:  You enter pure DOS by
pressing F8 early on in the boot up process and select the option command
prompt only.  I'm assuming that you have Windows 95 or 98 installed?

Yes you could get the iso file burnt on to a CD and get your files off of
that or you could download them.  It much depends upon what is easiest for
you.  But to use floppies for the Debian install, I think that it is about
six floppies you'll need to create.

Whatever, method you use to start the installation you need to choose the
right kernel that matches your hardware.  Then once you've got into the
installation process, your going to have to partition your d drive and
change it to ex2 and swap type partitions.  But that can be attended to at
the right time.  Firstly, you need to be able to start the installation
process.

Please visit http://linux-speakup.org and read the Debian installation
documentation.


Gena






-----Original Message-----
From: speakup-admin at braille.uwo.ca
[mailto:speakup-admin at braille.uwo.ca]On Behalf Of Angus MacKinnon
Sent: 29 September 2001 22:05
To: Speakup List; BLinux newbie List
Subject: Installation help


I have a 1.44MB floppy that is blank and has been formatted useing Windows.
I would like to create a Speakup bootable floppy. Can someone help me create
the bootable floppy so I can use my DECTalk Express on COM1 to install
Debian Linux on the D: of my hard disk? I downloaded
"debian-2.2r2-speakup.iso". Should I have this file on CD?I have a friend
that has offered the use of his internal CD burner. How would I send it to
this person if the "debian-2.2r2-speakup.iso" should be on a CD(s)?

Angus MacKinnon, Port Moody British Columbia Canada
MAILTO:dabneyadfm at home.com



_______________________________________________
Speakup mailing list
Speakup at braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup


_______________________________________________
Speakup mailing list
Speakup at braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup





More information about the Speakup mailing list