OFF TOPIC - LINUX NETWORKING

[mo.valli at bt.com]

-----Original Message-----
From: Kirk Wood [mailto:cpt.kirk at 1tree.net]
Sent: 09 July 2001 19:03
To: speakup at braille.uwo.ca
Subject: Re: OFF TOPIC - LINUX NETWORKING


On Mon, 9 Jul 2001, Gregory Nowak wrote:
> Why?
> I have 4 machines here, and they all go over the same cross over cable
> which gets switched from machine to machine as it's needed.
> Two of the boxes run slackware, and they connect
> with themselves as well as their windows
> counterparts just fine.
> Besides, if the windows boxes connect to the linux boxes just
> fine over the cross over cable,
> then I really don't see how a hub would help.

Well lets start with the fact that some network cards don't work properly
using a cross over cable. Then follow by the fact that no vendor I know of
will support a machine using a cross over cable.

** I've already said that either of the two linux boxes quite haply network
with the windows box using a crossover. 

I would also add that this eliminates the "oops, the cable is between the
wrong two boxes" errors.
** only happens to silly people.

It also answers more of how the network is
setup. Right now, we don't know that he doesn't have two network cards in
one or more machines with one being expected to act as a router.
** I would have said if I had two network cards in any machines.


This may work, but is less then optimal and much more difficult to
troubleshoot. It
is much easier to deal with problems when the problem is simplified.

I don't have two network cards in any of the machines. I just want two linux
boxes to be able to network using single cards in each machines and using a
crossover. Is that clear enough???

=======
Kirk Wood
Cpt.Kirk at 1tree.net

The mind is like a parachute; it works much better when open.
If your too open minded, your brains will fall out.



_______________________________________________
Speakup mailing list
Speakup at braille.uwo.ca
http://speech.braille.uwo.ca/mailman/listinfo/speakup