firewall stuff last time, I promise:)
Gregory Nowak
gnowak1 at uic.edu
Wed Dec 26 15:21:30 EST 2001
Hi,
This script is pretty self-explanitory.
To change things, simply edit between quotes.
For example, to make ssh available just to your lan, change
SSH="no"
to
SSH="yes"
If you want to make ssh available to everyone on the internet in addition to the above, change
SSHPUBLIC="no"
to
SSHPUBLIC="yes"
I have set your internet eth interface to eth0, and your lan device to eth1 since it sounds like that's what you want.
I have also made ssh and ftp publically accessible.
To get an idea how to modify this script for your needs, compare what
you got off the endoshield sight to the edited version I'm attaching with the 3 above variables changed.
I'm not sure what you mean by changing addresses (do you mean inputing the correct address for your internal lan, or allowing/denying certain hosts).
Sorry I can't tell you how to remove the old firewall from your scripts, and add the new one to your scripts, since I don't know what distro you have, and where your current firewall starts (that could happen in a couple different scripts). Hth.
Greg
On Wed, Dec 26, 2001 at 02:35:47PM -0500, Deedra Waters wrote:
> Ok, Greg told me about this one a little while ago, then I lost the email,
> so couldn't reply to it....
> I need to know how to change certain options in the configuration in this
> script.
> example, I need to know how to change it to eth0, along with the fact that
> I am running ssh, and an ftp server. I need to know how to tell it that,
> and also how to make it available to people who are not on my network.I
> also need to know how to give it the right addresses that it asks for, or
> rather how to change them.
> Last thing..... I need to figure out how to remove my current firewall
> from the startup and add this one.
> sorry for so much trouble....
>
> #
> #**ENDOSHIELD 1.2**
> #Written by Endo (Dave Cheeseman) cheeseman at users.sourceforge.net
> #EndoShield Site - http://www.sourceforge.net/projects/endoshield
>
> #******************************************************************************************************************************
> #Configuration Part of the script - If you are unsure of any of these points, leave them as the default setting, changing these
> #options can seriously affect the security of your firewall.
>
> #Do you want to run a ipchains firewall or iptables?
> #If you are unsure about this, you need to find out what kernel you are running.
> #See the readme file for more information.
> TYPE="iptables"
>
> # Change INETDEV to the network device connceted to the Internet (ppp0/eth0)
> # This is ppp0 by default for dial-up connections. Most cable modem users
> # will probably want eth0 or possibly eth1. When in doubt look at the command
> # 'ifconfig'.
> INETDEV="ppp0"
>
> # Change LAN to the correct network address and network mask for your LAN
> # this can be found by using ifconfig from one of the clients
> LAN="192.168.1.0/24"
>
> # Change LANDEV to the network device connected to your LAN
> LANDEV="eth0"
>
> # There should be no need to change this
> LOCALIP=`ifconfig $LANDEV | grep inet | cut -d : -f 2 | cut -d \ -f 1`
>
> #Do you want other machines on the internet to be able to PING your machine?
> #(If unsure, leave as no)
> PING="no"
>
> #If you selected no as the previous option, do you want the machine to log
> #the dropped pings?
> LOGPINGS="no"
>
> #If you trust all data coming from your local network, put yes.
> TRUST="yes"
>
> #If you want to share this machines internet connection, put yes
> #(This will provide Masquerading services for you LAN)
> #Otherwise, put no
> SHARE="yes"
>
> #Is this machine connected to a Samba Network?
> #If yes, over a LAN?
> SAMBALAN="no"
> #Or over a WAN?
> SAMBAWAN="no"
> #Or over both?
> SAMBA="no"
>
> #If you are running any servers on your machine, you need to specify them below,
> #you also need to specify wether these servers/ports should be open to just your local
> #network, or the whole world. If you answer yes to PORTNAMEPUBLIC, then the specified port
> #will be open to the whole internet, if this is left to the default, which is no, but you
> #have specified that you are running a server on the port, the port will only be available to
> #your local lan.
>
> #Do you run a FTP server?
> FTP="no"
> FTPPUBLIC="no"
>
> #Do you run a SSH server?
> SSH="yes"
> SSHPUBLIC="yes"
>
> #Do you run a telnet server?
> TELNET="no"
> TELNETPUBLIC="no"
>
> #Do you run a Web server?
> WEB="no"
> WEBPUBLIC="no"
>
> #Do you run a mail server?
> MAIL="no"
> MAILPUBLIC="no"
>
> #Do you run identd?
> IDENT="no"
> IDENTPUBLIC="no"
>
> #If you want to add any trusted hosts, that is, machines on the internet or on your local network
> #which you want to fully trust (Allow all data from these machines pass through the firewall), then
> #list these machines below.
> TRUSTEDHOST1="131.211.28.48"
> TRUSTEDHOST2="195.92.249.253"
> TRUSTEDHOST3="194.159.164.195"
> TRUSTEDHOST4="129.27.3.9"
> TRUSTEDHOST5="1.1.1.1"
>
> #If you want to block any hosts from accessing your machine, please list them below, these machines
> #will not be able to access your machine at all, even your public access servers.
> DENYHOST1="1.1.1.1"
> DENYHOST2="1.1.1.1"
> DENYHOST3="1.1.1.1"
> DENYHOST4="1.1.1.1"
> DENYHOST5="1.1.1.1"
>
> #End of Configuration.
> #************************************************************************************************************
>
> echo "---------------------------------------------------------"
> echo "Local Network Device: $LANDEV"
> echo "Local IP: $LOCALIP"
> echo "Local Network Address: $LAN"
> echo "External Network Device: $INETDEV"
> echo "---------------------------------------------------------"
> echo ""
>
> #Set default chain policy
> echo -n "Setting default chain policies..."
> iptables -P INPUT DROP
> iptables -P FORWARD DROP
> iptables -P OUTPUT ACCEPT
> echo " Done!"
>
> #Flush all chains
> echo -n "Flushing chains..."
> iptables -F
> iptables -X
> iptables -t nat -F PREROUTING
> iptables -t nat -F POSTROUTING
> echo " Done!"
>
> #Add custom chains
> echo -n "Adding custom chains..."
> iptables -N inet-in
> iptables -N inet-out
> echo " Done!"
>
> #Set INPUT rules
> echo -n "Setting rules for INPUT chain..."
> iptables -A INPUT -i lo -j ACCEPT
> if [ "$TRUST" = "yes" -o "$TRUST" = "YES" ]; then
> iptables -A INPUT -i $LANDEV -j ACCEPT
> else
> iptables -A INPUT -i $LANDEV -j inet-in
> fi
> iptables -A INPUT -i $INETDEV -j inet-in
> echo " Done!"
>
> #Set FORWARD rules
> echo -n "Setting rules for FORWARD chain..."
> if [ "$SHARE" = "yes" -o "$SHARE" = "YES" ]; then
> modprobe iptable_nat
> iptables -A FORWARD -s $LAN -j ACCEPT
> iptables -A FORWARD -d $LAN -j ACCEPT
> echo 1 > /proc/sys/net/ipv4/ip_forward
> #Activate masquerade
> echo -n "Activating masquerade..."
> iptables -t nat -A POSTROUTING -o $INETDEV -j MASQUERADE
> echo " Done!"
> fi
> echo " Done!"
>
> #Set OUTPUT rules
> echo -n "Setting rules for OUTPUT chain..."
> iptables -A OUTPUT -j inet-out
> echo " Done!"
>
> #Set inet-in rules
> echo -n "Setting rules for internet device incoming chain: "
> echo -n "Setting open ports for specified servers / Network Services .... "i
> if [ "$SAMBALAN" = "YES" -o "$SAMBALAN" = "yes" ]; then
> iptables -A inet-in -p tcp -i $LANDEV -o $LANDEV --dport 138:139 -j ACCEPT
> fi
> if [ "$SAMBAWAN" = "YES" -o "$SAMBAWAN" = "yes" ]; then
> iptables -A inet-in -p tcp -i $INETDEV -o $INETDEV --dport 138:139 -j ACCEPT
> fi
> if [ "$SAMBA" = "YES" -o "$SAMBA" = "yes" ]; then
> iptables -A inet-in -p tcp --dport 138:139 -j ACCEPT
> fi
> if [ "$FTP" = "YES" -o "$FTP" = "yes" ]; then
> iptables -A inet-in -p tcp -i $LANDEV -o $LANDEV --dport 21 -j ACCEPT
> if [ "$FTPPUBLIC" = "YES" -o "$FTPPUBLIC" = "yes" ]; then
> iptables -A inet-in -p tcp --dport 21 -j ACCEPT
> fi
> fi
> if [ "$TELNET" = "YES" -o "$TELNET" = "yes" ]; then
> iptables -A inet-in -p tcp -i $LANDEV -o $LANDEV --dport 23 -j ACCEPT
> if [ "$TELNETPUBLIC" = "YES" -o "$TELNETPUBLIC" = "yes" ]; then
> iptables -A inet-in -p tcp --dport 23 -j ACCEPT
> fi
> fi
> if [ "$SSH" = "YES" -o "$SSH" = "yes" ]; then
> iptables -A inet-in -p tcp -i $LANDEV -o $LANDEV --dport 22 -j ACCEPT
> if [ "$SSHPUBLIC" = "YES" -o "$SSHPUBLIC" = "yes" ]; then
> iptables -A inet-in -p tcp --dport 22 -j ACCEPT
> fi
> fi
> if [ "$WEB" = "YES" -o "$WEB" = "yes" ]; then
> iptables -A inet-in -p tcp -i $LANDEV -o $LANDEV --dport 80 -j ACCEPT
> if [ "$WEBPUBLIC" = "YES" -o "$WEBPUBLIC" = "yes" ]; then
> iptables -A inet-in -p tcp --dport 80 -j ACCEPT
> fi
> fi
> if [ "$MAIL" = "YES" -o "$MAIL" = "yes" ]; then
> iptables -A inet-in -p tcp -i $LANDEV -o $LANDEV --dport 110 -j ACCEPT
> if [ "$MAILPUBLIC" = "YES" -o "$MAILPUBLIC" = "yes" ]; then
> iptables -A inet-in -p tcp --dport 110 -j ACCEPT
> fi
> fi
> if [ "$IDENT" = "YES" -o "$IDENT" = "yes" ]; then
> iptables -A inet-in -p tcp -i $LANDEV -o $LANDEV --dport 113 -j ACCEPT
> if [ "$IDENTPUBLIC" = "YES" -o "$IDENTPUBLIC" = "yes" ]; then
> iptables -A inet-in -p tcp --dport 113 -j ACCEPT
> fi
> fi
> echo "Done!"
>
> echo -n "Adding trusted hosts.... "
> iptables -A inet-in -s $TRUSTEDHOST1 -j ACCEPT
> iptables -A inet-in -s $TRUSTEDHOST2 -j ACCEPT
> iptables -A inet-in -s $TRUSTEDHOST3 -j ACCEPT
> iptables -A inet-in -s $TRUSTEDHOST4 -j ACCEPT
> iptables -A inet-in -s $TRUSTEDHOST5 -j ACCEPT
> echo "Done!"
>
> echo -n "Denying all specified hosts.... "
> iptables -A inet-in -s $DENYHOST1 -j DROP
> iptables -A inet-in -s $DENYHOST2 -j DROP
> iptables -A inet-in -s $DENYHOST3 -j DROP
> iptables -A inet-in -s $DENYHOST4 -j DROP
> iptables -A inet-in -s $DENYHOST5 -j DROP
> echo "Done!"
>
> echo -n " Setup ping option on/off..."
> if [ "$PING" = "YES" -o "$PING" = "yes" ]; then
> iptables -A inet-in -p ICMP -j ACCEPT
> fi
> if [ "$LOGPINGS" = "YES" -o "$LOGPINGS" = "yes" ]; then
> iptables -A inet-in -p ICMP -j LOG
> fi
> echo "Done!"
>
> echo -n " Setup port blocking on vulnerable ports..."
> #Block NFS
> iptables -A inet-in -p tcp --dport 2049 -j LOG
> iptables -A inet-in -p udp --dport 2049 -j LOG
> iptables -A inet-in -p tcp --dport 2049 -j DROP
> iptables -A inet-in -p udp --dport 2049 -j DROP
> #Block postgres
> iptables -A inet-in -p tcp --dport postgres -j LOG
> iptables -A inet-in -p udp --dport postgres -j LOG
> iptables -A inet-in -p tcp --dport postgres -j DROP
> iptables -A inet-in -p udp --dport postgres -j DROP
> #Block X
> iptables -A inet-in -p tcp --dport 5999:6003 -j LOG
> iptables -A inet-in -p udp --dport 5999:6003 -j LOG
> iptables -A inet-in -p tcp --dport 5999:6003 -j DROP
> iptables -A inet-in -p udp --dport 5999:6003 -j DROP
> #Block XFS
> iptables -A inet-in -p tcp --dport 7100 -j LOG
> iptables -A inet-in -p udp --dport 7100 -j LOG
> iptables -A inet-in -p tcp --dport 7100 -j DROP
> iptables -A inet-in -p udp --dport 7100 -j DROP
> #Block Back Orifice
> iptables -A inet-in -p tcp --dport 31337 -j LOG
> iptables -A inet-in -p udp --dport 31337 -j LOG
> iptables -A inet-in -p tcp --dport 31337 -j DROP
> iptables -A inet-in -p udp --dport 31337 -j DROP
> #Block netbus
> iptables -A inet-in -p tcp --dport 12345:12346 -j LOG
> iptables -A inet-in -p udp --dport 12345:12346 -j LOG
> iptables -A inet-in -p tcp --dport 12345:12346 -j DROP
> iptables -A inet-in -p udp --dport 12345:12346 -j DROP
> echo " Done!"
> echo " Done!"
> echo -n " Setting connection tracking..."
> iptables -A INPUT -i $INETDEV -m state --state NEW,INVALID -j DROP
> iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
> echo " Done!"
>
> if [ "$TYPE" = "ipchains" -o "$TYPE" = "IPCHAINS" ]; then
> echo "MAJOR APOLOGIES - The ipchains version didnt make it into the first version, but it is the highest priority on my TODO list"
> echo "Check http://www.endoshield.sourceforge.net for the next release"
> fi
-------------- next part --------------
#
#**ENDOSHIELD 1.2**
#Written by Endo (Dave Cheeseman) cheeseman at users.sourceforge.net
#EndoShield Site - http://www.sourceforge.net/projects/endoshield
#******************************************************************************************************************************
#Configuration Part of the script - If you are unsure of any of these points, leave them as the default setting, changing these
#options can seriously affect the security of your firewall.
#Do you want to run a ipchains firewall or iptables?
#If you are unsure about this, you need to find out what kernel you are running.
#See the readme file for more information.
TYPE="iptables"
# Change INETDEV to the network device connceted to the Internet (ppp0/eth0)
# This is ppp0 by default for dial-up connections. Most cable modem users
# will probably want eth0 or possibly eth1. When in doubt look at the command
# 'ifconfig'.
INETDEV="eth0"
# Change LAN to the correct network address and network mask for your LAN
# this can be found by using ifconfig from one of the clients
LAN="192.168.1.0/24"
# Change LANDEV to the network device connected to your LAN
LANDEV="eth1"
# There should be no need to change this
LOCALIP=`ifconfig $LANDEV | grep inet | cut -d : -f 2 | cut -d \ -f 1`
#Do you want other machines on the internet to be able to PING your machine?
#(If unsure, leave as no)
PING="no"
#If you selected no as the previous option, do you want the machine to log
#the dropped pings?
LOGPINGS="no"
#If you trust all data coming from your local network, put yes.
TRUST="yes"
#If you want to share this machines internet connection, put yes
#(This will provide Masquerading services for you LAN)
#Otherwise, put no
SHARE="yes"
#Is this machine connected to a Samba Network?
#If yes, over a LAN?
SAMBALAN="no"
#Or over a WAN?
SAMBAWAN="no"
#Or over both?
SAMBA="no"
#If you are running any servers on your machine, you need to specify them below,
#you also need to specify wether these servers/ports should be open to just your local
#network, or the whole world. If you answer yes to PORTNAMEPUBLIC, then the specified port
#will be open to the whole internet, if this is left to the default, which is no, but you
#have specified that you are running a server on the port, the port will only be available to
#your local lan.
#Do you run a FTP server?
FTP="yes"
FTPPUBLIC="yes"
#Do you run a SSH server?
SSH="yes"
SSHPUBLIC="yes"
#Do you run a telnet server?
TELNET="no"
TELNETPUBLIC="no"
#Do you run a Web server?
WEB="no"
WEBPUBLIC="no"
#Do you run a mail server?
MAIL="no"
MAILPUBLIC="no"
#Do you run identd?
IDENT="no"
IDENTPUBLIC="no"
#If you want to add any trusted hosts, that is, machines on the internet or on your local network
#which you want to fully trust (Allow all data from these machines pass through the firewall), then
#list these machines below.
TRUSTEDHOST1="131.211.28.48"
TRUSTEDHOST2="195.92.249.253"
TRUSTEDHOST3="194.159.164.195"
TRUSTEDHOST4="129.27.3.9"
TRUSTEDHOST5="1.1.1.1"
#If you want to block any hosts from accessing your machine, please list them below, these machines
#will not be able to access your machine at all, even your public access servers.
DENYHOST1="1.1.1.1"
DENYHOST2="1.1.1.1"
DENYHOST3="1.1.1.1"
DENYHOST4="1.1.1.1"
DENYHOST5="1.1.1.1"
#End of Configuration.
#************************************************************************************************************
echo "---------------------------------------------------------"
echo "Local Network Device: $LANDEV"
echo "Local IP: $LOCALIP"
echo "Local Network Address: $LAN"
echo "External Network Device: $INETDEV"
echo "---------------------------------------------------------"
echo ""
#Set default chain policy
echo -n "Setting default chain policies..."
iptables -P INPUT DROP
iptables -P FORWARD DROP
iptables -P OUTPUT ACCEPT
echo " Done!"
#Flush all chains
echo -n "Flushing chains..."
iptables -F
iptables -X
iptables -t nat -F PREROUTING
iptables -t nat -F POSTROUTING
echo " Done!"
#Add custom chains
echo -n "Adding custom chains..."
iptables -N inet-in
iptables -N inet-out
echo " Done!"
#Set INPUT rules
echo -n "Setting rules for INPUT chain..."
iptables -A INPUT -i lo -j ACCEPT
if [ "$TRUST" = "yes" -o "$TRUST" = "YES" ]; then
iptables -A INPUT -i $LANDEV -j ACCEPT
else
iptables -A INPUT -i $LANDEV -j inet-in
fi
iptables -A INPUT -i $INETDEV -j inet-in
echo " Done!"
#Set FORWARD rules
echo -n "Setting rules for FORWARD chain..."
if [ "$SHARE" = "yes" -o "$SHARE" = "YES" ]; then
modprobe iptable_nat
iptables -A FORWARD -s $LAN -j ACCEPT
iptables -A FORWARD -d $LAN -j ACCEPT
echo 1 > /proc/sys/net/ipv4/ip_forward
#Activate masquerade
echo -n "Activating masquerade..."
iptables -t nat -A POSTROUTING -o $INETDEV -j MASQUERADE
echo " Done!"
fi
echo " Done!"
#Set OUTPUT rules
echo -n "Setting rules for OUTPUT chain..."
iptables -A OUTPUT -j inet-out
echo " Done!"
#Set inet-in rules
echo -n "Setting rules for internet device incoming chain: "
echo -n "Setting open ports for specified servers / Network Services .... "i
if [ "$SAMBALAN" = "YES" -o "$SAMBALAN" = "yes" ]; then
iptables -A inet-in -p tcp -i $LANDEV -o $LANDEV --dport 138:139 -j ACCEPT
fi
if [ "$SAMBAWAN" = "YES" -o "$SAMBAWAN" = "yes" ]; then
iptables -A inet-in -p tcp -i $INETDEV -o $INETDEV --dport 138:139 -j ACCEPT
fi
if [ "$SAMBA" = "YES" -o "$SAMBA" = "yes" ]; then
iptables -A inet-in -p tcp --dport 138:139 -j ACCEPT
fi
if [ "$FTP" = "YES" -o "$FTP" = "yes" ]; then
iptables -A inet-in -p tcp -i $LANDEV -o $LANDEV --dport 21 -j ACCEPT
if [ "$FTPPUBLIC" = "YES" -o "$FTPPUBLIC" = "yes" ]; then
iptables -A inet-in -p tcp --dport 21 -j ACCEPT
fi
fi
if [ "$TELNET" = "YES" -o "$TELNET" = "yes" ]; then
iptables -A inet-in -p tcp -i $LANDEV -o $LANDEV --dport 23 -j ACCEPT
if [ "$TELNETPUBLIC" = "YES" -o "$TELNETPUBLIC" = "yes" ]; then
iptables -A inet-in -p tcp --dport 23 -j ACCEPT
fi
fi
if [ "$SSH" = "YES" -o "$SSH" = "yes" ]; then
iptables -A inet-in -p tcp -i $LANDEV -o $LANDEV --dport 22 -j ACCEPT
if [ "$SSHPUBLIC" = "YES" -o "$SSHPUBLIC" = "yes" ]; then
iptables -A inet-in -p tcp --dport 22 -j ACCEPT
fi
fi
if [ "$WEB" = "YES" -o "$WEB" = "yes" ]; then
iptables -A inet-in -p tcp -i $LANDEV -o $LANDEV --dport 80 -j ACCEPT
if [ "$WEBPUBLIC" = "YES" -o "$WEBPUBLIC" = "yes" ]; then
iptables -A inet-in -p tcp --dport 80 -j ACCEPT
fi
fi
if [ "$MAIL" = "YES" -o "$MAIL" = "yes" ]; then
iptables -A inet-in -p tcp -i $LANDEV -o $LANDEV --dport 110 -j ACCEPT
if [ "$MAILPUBLIC" = "YES" -o "$MAILPUBLIC" = "yes" ]; then
iptables -A inet-in -p tcp --dport 110 -j ACCEPT
fi
fi
if [ "$IDENT" = "YES" -o "$IDENT" = "yes" ]; then
iptables -A inet-in -p tcp -i $LANDEV -o $LANDEV --dport 113 -j ACCEPT
if [ "$IDENTPUBLIC" = "YES" -o "$IDENTPUBLIC" = "yes" ]; then
iptables -A inet-in -p tcp --dport 113 -j ACCEPT
fi
fi
echo "Done!"
echo -n "Adding trusted hosts.... "
iptables -A inet-in -s $TRUSTEDHOST1 -j ACCEPT
iptables -A inet-in -s $TRUSTEDHOST2 -j ACCEPT
iptables -A inet-in -s $TRUSTEDHOST3 -j ACCEPT
iptables -A inet-in -s $TRUSTEDHOST4 -j ACCEPT
iptables -A inet-in -s $TRUSTEDHOST5 -j ACCEPT
echo "Done!"
echo -n "Denying all specified hosts.... "
iptables -A inet-in -s $DENYHOST1 -j DROP
iptables -A inet-in -s $DENYHOST2 -j DROP
iptables -A inet-in -s $DENYHOST3 -j DROP
iptables -A inet-in -s $DENYHOST4 -j DROP
iptables -A inet-in -s $DENYHOST5 -j DROP
echo "Done!"
echo -n " Setup ping option on/off..."
if [ "$PING" = "YES" -o "$PING" = "yes" ]; then
iptables -A inet-in -p ICMP -j ACCEPT
fi
if [ "$LOGPINGS" = "YES" -o "$LOGPINGS" = "yes" ]; then
iptables -A inet-in -p ICMP -j LOG
fi
echo "Done!"
echo -n " Setup port blocking on vulnerable ports..."
#Block NFS
iptables -A inet-in -p tcp --dport 2049 -j LOG
iptables -A inet-in -p udp --dport 2049 -j LOG
iptables -A inet-in -p tcp --dport 2049 -j DROP
iptables -A inet-in -p udp --dport 2049 -j DROP
#Block postgres
iptables -A inet-in -p tcp --dport postgres -j LOG
iptables -A inet-in -p udp --dport postgres -j LOG
iptables -A inet-in -p tcp --dport postgres -j DROP
iptables -A inet-in -p udp --dport postgres -j DROP
#Block X
iptables -A inet-in -p tcp --dport 5999:6003 -j LOG
iptables -A inet-in -p udp --dport 5999:6003 -j LOG
iptables -A inet-in -p tcp --dport 5999:6003 -j DROP
iptables -A inet-in -p udp --dport 5999:6003 -j DROP
#Block XFS
iptables -A inet-in -p tcp --dport 7100 -j LOG
iptables -A inet-in -p udp --dport 7100 -j LOG
iptables -A inet-in -p tcp --dport 7100 -j DROP
iptables -A inet-in -p udp --dport 7100 -j DROP
#Block Back Orifice
iptables -A inet-in -p tcp --dport 31337 -j LOG
iptables -A inet-in -p udp --dport 31337 -j LOG
iptables -A inet-in -p tcp --dport 31337 -j DROP
iptables -A inet-in -p udp --dport 31337 -j DROP
#Block netbus
iptables -A inet-in -p tcp --dport 12345:12346 -j LOG
iptables -A inet-in -p udp --dport 12345:12346 -j LOG
iptables -A inet-in -p tcp --dport 12345:12346 -j DROP
iptables -A inet-in -p udp --dport 12345:12346 -j DROP
echo " Done!"
echo " Done!"
echo -n " Setting connection tracking..."
iptables -A INPUT -i $INETDEV -m state --state NEW,INVALID -j DROP
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
echo " Done!"
if [ "$TYPE" = "ipchains" -o "$TYPE" = "IPCHAINS" ]; then
echo "MAJOR APOLOGIES - The ipchains version didnt make it into the first version, but it is the highest priority on my TODO list"
echo "Check http://www.endoshield.sourceforge.net for the next release"
fi
More information about the Speakup
mailing list