ppp still not working

[Gregory Nowak]

It still fails with speeds from 57600 to 19200. I haven't tried anything lower then that.
Greg

On Sun, Apr 29, 2001 at 06:11:51PM -0400, Charles Hallenbeck wrote:
> The "H0" command says to hang up, while "H1" says to pick up the line, so
> for an initialization string "H0" is what you want. As for the
> "&F" command, your modem has several factory default sets built in, and
> without a digit you get "&F0". I once had a very similar problem to yours
> which was solved by switchingt those factory defaults to "&F1" which gave
> me hardware handshaking. The only other thing I can think of is to wonder
> if the 115200 speed might not be too fast for a 14.4 modem. Does it still
> fail if you lower that to 57600 or 38400? But count on it - it is not your
> ram or your CPU speed. I am sure someone will chime in here with better
> advice than I have at the moment, but you ought to be able to get much
> better performance than you reported with that setup.
> Chuck
> 
> 
> My web site is http://www.mhonline.net/~chuckh 
> The Moon is Waxing Crescent (41% of Full)
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup