[Victor Tsaran]

Hi,
You certainly need to use the SAMBA server in order to achieve the
connectivity between Redhat and WIndows NT machines. To check your
connection, follow these steps:

1. Make sure your cables are OK (yes, this hapens sometimes);
2. Ping your own machine to make sure your TCP/IP softwae is working
correctly.
3. makes sure that your Linux and NT machines are on the same subnet. If
they are not, then you need to set a network route from your Linux subnet to
the NT subnet. If resolved, try
4. Ping your gateway for the NT subnet. Make sure you can also reach your
machine from NT station. Remember that sometimes packets can go one way, but
the gateway might not know which way to get them back;
5. Eventually, set up SAMBA server ( which is a bit of a task! ) and then
use nmblookup utility to see any machine on your NT subnet, like

nmblookup -A <IP address of an NT workstation>

Of course, all of these steps might change based on what type of results you
get (negative or positive). As you can see, your initial description wasn't
descriptive enough to give you a more precise help!
Regards,
Vic

----- Original Message -----
From: "mosh adetoro" <mosh_she at yahoo.com>
To: <speakup at braille.uwo.ca>
Sent: Monday, August 21, 2000 5:28 AM
Subject: Re:


> I can't seem to put my red hat liux on our windows nt
> lan. What do i do? I put in the correct ip settings
> and all but it still dosn't work!
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Mail - Free email you can access from anywhere!
> http://mail.yahoo.com/
>
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup