Installing Red Hat 6.2 with Speakup

[shaikh at rnibncw.demon.co.uk]

Please remove shaikh at rnibncw.demon.co.uk from your mailing list 
and confirm you have done so.  He is no longer at this college and 
his account has been deleted.


Dave Cresswell
Network Manager
RNIB New College
Whittington Road
Worcester
WR5 2JX

From:           	"stephen dawes" <sdawes at gov.calgary.ab.ca>
Organization:  RNIB New College Worcester.
To:             	<speakup at braille.uwo.ca>
Subject:        	RE: Installing Red Hat 6.2 with Speakup
Date sent:      	Mon, 17 Jul 2000 08:08:44 -0600
Send reply to:  	speakup at braille.uwo.ca

> You can use disk druid to do your disk configuration during the Red Hat
> install.  It works well with Speakup.
> 
> F1 add partition.  Then the first field, / where your cursor lands when you
> open the add window, is the partition name.  E.G. / , /var /usr /pub ... and
> left blank for swap.
> 
> The next field, by pressing tab, is the size of the partition.  It defaults
> to 1 mg.  You will need to backspace over the 1 if your size does not
> include a leading 1. enter the size of the partition here.
> 
> The next field, tab, is whether the partition should grow to fill the
> available space on the drive.  To check it, press the space bar.  If it is
> checked, you will her (*) otherwise, you will here ).
> 
> The next field, tab, is the partition type, use up and down arrows to pick
> the type of partition.  To confirm your choice, press insert + 8 .
> 
> The next field, is the checked by default, and I have never had to uncheck
> it.  It is to do with the physical drive you are partitioning.
> 
> Then you will tab to ok, and press enter.
> 
> As you create the various partitions, they will be added to a list.  you can
> use the up and down arrow keys to select which ever on you need.
> 
> F3 edit, allows you to make changes to the partitions that you have
> configured.
> 
> F4, delete, allows you to delete the selected partition.
> 
> I am doing this from memory, so sorry if I have made any mistakes.
> 
> If you have any additional questions, you will find me on the Speakup
> reflector,
> lwl.braille.uwo.ca:4074
> this weekend.  This is a speak freely reflector.  You can get the speak
> freely program from,
> www.speakfreely.org
> 
> Or you can write me at the speak list, or at home,
> sdawes at telusplanet.net
> 
> I hope this helps!
> 
> Steve Dawes
> 
> > -----Original Message-----
> > From: speakup-admin at braille.uwo.ca
> > [mailto:speakup-admin at braille.uwo.ca]On Behalf Of Georgina Joyce
> > Sent: 2000 July 14 2:12 PM
> > To: Speakup List
> > Subject: Installing Redhat 6.2 with Speakup
> >
> >
> > Hi
> >
> > I've been away from the list for a while and come back to see that there
> > kernels for the Dectalk Express and Redhat installation.
> > However, I'm stuck
> > on the partitioning tool.  I've tried selecting my options but I can't be
> > doing it right.  I have the appropriate partitions ready for an
> > installation, which are: /dev/hda2 = Linux native  and /dev/hdb2 = Linux
> > swap 82.
> >
> > I wondered if I could just use the function keys and type the appropriate
> > values, without using the curser keys to point to the selection?
> >
> > Thanks for the Dectalk & Redhat support.
> >
> > Gena & Erwin
> >
> > gena at visson.freeserve.co.uk g.joyce at uclan
> >
> http://visson.freeserve.co.uk
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
> 
> 
> _______________________________________________
> Speakup mailing list
> Speakup at braille.uwo.ca
> http://speech.braille.uwo.ca/mailman/listinfo/speakup
>